Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗
things to sell
gt47/88 with 6 boost manifold $4500 with dump pipe (made 1033rwhp on around 52 - 53psi)
48mm pro gate $500
hypertune manifold with hypertune t/b $2200
1600cc injectors $500
billet fuel rail $150
alloy catch can
cooler system - plazmaman 1500hp cooler with davis craig pre pump, ice box with all braid and fittings, all brackets (a few have bent) $2500
alloy radiator made perfectly to fit into the front aprin of a vl so you can accommodate the w2a cooler or even to have an extra 25cm of room to work on the front of the engine. with proper fittings $500
complete fuel system rated at 2500hp. comes with magnafuel pump, all fittings, filters and braided lines up to the rail $1500
fully braced 9in, unsure of damage, looks like broken axles, has nodular centre, mw carrier etc etc all the best of the best $5000, i can organise axles as theyre only cheap. the diff will hold over 1500hp in a vl and over 2000hp in a chassis car
GF2000 CLUTCHLESS GEARBOX
selling complete with new 3rd and 4th gear, new clutch, steel bellhousing + tailshaft $12000
r33 5 spd manual with tripple plate clutch (full conversion) $1900
brand new 90/10 front shocks and brand new front springs $500
all proper autometer gauges
can sell the dash with the car and gauges complete for 2k or separate
5in pro comp tacho
200mph speedo
oil pressure
water temp
microtech lt10s ecu with x4 box and coil packs $1400
full interior.. complete with 2 front seats, rpm harnesses, door trims, back seats, roof lining, cage lining, back parcel tray $2500
eboost 2 60psi one $500
set of 4 pro star wheels and street tyres 15 x 10 rears with big rubber and 4.5 back spacing and 3.5 fronts $1500 for the set
perspex rear window + rear door windows 200
ill list more things as i start to pull it apart
i have a **** load of rear end gadgets + mounting brackets and rods but i will have to pull everything out and make sure its still ok before i sell it.
welcome to inspect the rear end if anyone is interested in taking the lot and welding it up to your own car.. the rear end not including the diff owes me around the 20k mark and will sell for practicaly **** all...
i have hammared all the new rims on the car
have a set of used 29.5 x 10.5 tyres and a set of front runner tyres too..
will sell the shell with the rear end including the diff, just make an offer and im happy to move on. or even without the diff.....
will ship anything at buyers expense
if anyone wants somethign separated, just pm me and ill go from there..
make an offer on anything if you like but im not in a hurry to sell so please no low ball offers
im welcome to any swaps anyone may have
AND BEFORE WE GO ANY FURTHER, IF SOMEONE CAN PSYCH ME UP BY SHOWING ME A PROPER CHASSIS CAR FOR SALE THAT I COULD PUT THIS SET UP INTO feel free to email me at [email removed]
that car was my heart and soul for the last 7 years and owes me more than where im living!! every single part that went into that car was top of the line, i had to argue with my mechanics to put the better, stronger and more expensive parts in it just so it was overkill so when i stepped it up to the next level things didnt have to be done again, there is so much braided lines and fittings in this car its not funny, it goes to show i was happy to spend that $100 to put a braided line where you wouldnt even see it just because i didnt want hoses.. if anyone is asked about this car they'll know i didnt take a short cut
was on the cover of issue 146 of street commodores
serious enquiries only please as i dont want 100 calls a day for nothing..
[phone removed]
0 likes
mate i can't find that issue of st commos i had it someone, so do u have any pics of the trim??
0 likes
if you decide to sell exhaust manifold let me know
0 likes
Please keep chat to a minimum in this thread,
it is a FS thread.. Not a discussion thread.
- Weezy
0 likes
exhaust manifold $1000, im unsure what it cost me
the long engine is not for sale... ive already had about 10 calls about the engine and that puppy is staying in the shed it was designed and built... unless someone wants to spend 100k+ for it, im sure maatouk will give up his secret for 50% of 100k :) haha
i also have the top of the line magnafuel fuel reg that can be sold for $300 or i can work soemthing out for someone who wants the fuel system, i think theyre like $500 new though i could be wrong
---------- Post added 17-03-10 at 09:02 ----------
THE BEST PIC OF ALL TIME - RIP
---------- Post added 17-03-10 at 14:03 ----------
everything has been sold except for the following;
r33 box - pending payment
whatever is left of the bare shell inc. all rear end bits..
g force box
ice box + cooler
hypertune manifold + t/b
fuel system
mb some other bits and pieces are left so just ask.
thanks
Some original photos have not been recovered yet.
0 likes
How about the chute and all the necessary equipment with it? Or you selling it complete with the remainder of the car?
0 likes
r33 5spd gone
chute gone
gate gone
shell will be sold bare as anything, only rear end will be sold with the shell, option to have wheelie bars or not.. i have 3 people interested in the wheelie bars so over the next few days time will tell..
i had a decent look at the shell today and the car looks repairable at the moment.. needs a **** load of body work and a new front end but the rear end looks spot on
---------- Post added 19-03-10 at 16:00 ----------
g force gf2000 sold
0 likes
19-03-10, 15:07 GMT+10#10 julian would you sell the tail lights, garnish etc? if so how much?
0 likes
19-03-10, 17:54 GMT+10#11 Quote:
Originally Posted by dinch
[View Post]
julian would you sell the tail lights, garnish etc? if so how much?
i think theyre all hammared.. ill find out for you tomorrow
0 likes
19-03-10, 18:19 GMT+10#12 If your keen on a vl race car pm xGM-747x he may have something that might suit you
0 likes
19-03-10, 21:06 GMT+10#13 do you still have the radiator?
0 likes
20-03-10, 08:01 GMT+10#14 you didnt put a price on the oil catch can. how much do u want
0 likes
20-03-10, 09:31 GMT+10#15 all those bits are gone..
shell, diff, wheelie bars, interior left
---------- Post added 21-03-10 at 04:37 ----------
http://www.calaisturbo.com.au/showth...81#post2434681 (http://www.calaisturbo.com.au/showthread.php?p=2434681#post2434681)
view here for pics of the car now.. ill be parting with the shell now as i have no room for it
0 likes
21-03-10, 14:02 GMT+10#16 jules u still got the 90/10's or you selling them with the shell
0 likes
21-03-10, 18:59 GMT+10#17 Which fuel reg is it Jules? Do u still have it? Is it the mp-9950-b reg?
That's the 2 port reg with 1:1 boost
if that's the reg than I'll pretty much take it
cheers
Troy
0 likes
21-03-10, 20:24 GMT+10#18 reg is gone..
ok i have the following that may be fs in the next week or so..
adjustable top and bottom arms
sway bar
watts link
9in housing with mw 35 spline axles
mw billet carrier
mw full spool.
TOMI nodular centre
will sell as a bundle if anyone is keen.
thanks
0 likes
23-03-10, 10:48 GMT+10#20 ALL LISTED PARTS ARE BACK FOR SALE..
person decided against taking most of the parts./....
so if youre keen call me straight away [phone removed]
0 likes
This discussion is closed to new replies.