Does anyone have a clutch alignment tool that I could borrow tonight? Im trying to put my engine back in my car and cant get the input shaft into the engine so I dont think my clutch is properly aligned

yeah if you wanna drive to collie

thanks but anyone a little closer?

doubt many people here do their own clutch... possibly dayne/vlwagonit a couple i could think of... most use workshops.

Or own autos Some original photos have not been recovered yet.

Quote: Originally Posted by Xibit0r doubt many people here do their own clutch... most use workshops. yeah righto

Yeah i dont have one man but what i have done in the past an may help u out is to try an do it by eye which works most of the time. Or u can have the pressure plate loosen off enough so u can just move the fricton plate with a bit of force, then put the box onto the back of the motor an sitting on the dowels. Then pull the box off the motor very carefully an straight then tighten up the pressure plate then if done right the box should slip straight back on.

We have one but I am not sure if it is at our farm. My parents are there this weekend, so I will get my Dad to have a look but if it was there, they won't be back until Monday.

ive got a mx7 input shaft that i cut off a stripped down box if you wanna borrow or buy it ive got two of them give me a ring on [phone removed]

Just snap a broom handle in half, jeez.

done that before haha

sooooo anybody got one i can borrow next week? just putting it out there tonight, if no luck 2moro i guess ill ring around see if anyone can do one cheap, otherwise its ebay time... (not for a vl turbo so a cut down mx7 shaft wont help much). changing the clutch on my n13 pulsar looking at about $50 on ebay if anyone knows of anything.... otherwise i can see myself creating something out of the piles of wood etc we have out the back... Some original photos have not been recovered yet.

They're cheap as dude, ring Steve at Autopro Innaloo, get the Kingchrome one, mention antilag.com

all the universal ones iv used were ****. but that might have bin because it was on my vt. last clutch i did i literaly did by eye. just lined the clutch plate up with the pressure plate from the outside edge if that makes sence. got it in first time aswell Some original photos have not been recovered yet.

Hey Jack, maybe PM the people in this thread who said they possibly could help Lc coupe in the beginning. See how they went. But be aware alot of people offer help and never follow through with things mate Some original photos have not been recovered yet.

$50???? i paid $10 for my clutch alignment tool (for the MX7 of course) from a clutch shop. Had all types there - all $10. They are plasic, but do the job perfectly. Have you called any clutch shops?

nope but for $10 i certainly will! was considerin one of the $50 jobbies because that would be useful on all cars for the future, as its probably a useful thing to get now, so mates and myself later can use. however at $10 a pop might aswell just get one for the pulsar.

I've used one of these from kincrome before, wasnt bad. http://www.kincrome.com.au/web/catal...number=K080014 (http://www.kincrome.com.au/web/catalogue/search/product_display.php?partnumber=K080014)

finger works pretty good.

the right size spark plug works good too, when you have nothing you can get the job done someway, its just a matter of using your head and what you have lying around Some original photos have not been recovered yet.