Hi all, I have just pressure tested my coolant system and coolant is comming out of the hose connection to the convertor, the clip on it is very tight so must be something inside that is broken, does anyone know if this is a big job and or need for a lpg mechanic to fix it, or possibly something I can fix ?
appreciate any advise
thanks
A/ hose could have a hairline split
B/ the black plastic (as the normally are, for cooling system) in/outlet that your hose clamps to might be split, they should just unscrew..
just take it to a gas specialist, they'll have the right part and wont charge much at all..
