guys my old man's mate has told me he is starting his new project. will be a rb30 in a hq panel van. as far as i know! he will be running--dont know if all this is true or not! hense the reason of this post rb30 block rb26 head custum 900hp rated turbo's x2 his using a 4 bolt main crank shaft out of a truck engine will have pistons and rods all the goods he wants to run around 32-34 psi out of the engine- aiming for low 8's (apparently)!! engine will set him back around $25,000--$30,000 ?? so my question is, can a rb30 even make 2000hp? to be honest it would be much better going with a r33 gtr or ls block wouldnt it??

lollllllllllll 2000hp for 30k i wish

will need to source a flux capacitor after that, block should be fine 900hp reated turbo's dont mean you will def get 900hp!

and a truck crank? to suit an RB30? 1700rwhp... Some original photos have not been recovered yet.

1700hp.. doing the maths about 25k build yeh? or for the turbos, gates and manifold.. 25k

Quote: Originally Posted by SKIDZ.1 guys my old man's mate is starting his new project. will be a rb30 in a hq panel van. as far as i know now! he will be running rb30 block rb26 head custum 900hp rated turbo's x2 his using a 4 bolt main crank shaft out of a truck engine will have pistons and rods all the goods he wants to run around 32-34 psi out of the engine- aiming for low 8's (apparently)!! engine will set him back around $25,000--$30,000 ?? so my question is, can a rb30 even handle 2000hp? to be honest it would be much better going with a r33 gtr block wouldnt it?? fucking lol. do u even know what 4bolt mains are? good to see will be thinking out of the box and using rods and pistons in a combustion engine. reality is a nice place, tell ur dads mate he should visit some time. whos building the engine?

Quote: Originally Posted by SKIDZ.1 guys my old man's mate is starting his new project. will be a rb30 in a hq panel van. as far as i know now! he will be running rb30 block rb26 head custum 900hp rated turbo's x2 his using a 4 bolt main crank shaft out of a truck engine will have pistons and rods all the goods he wants to run around 32-34 psi out of the engine- aiming for low 8's (apparently)!! engine will set him back around $25,000--$30,000 ?? so my question is, can a rb30 even handle 2000hp? to be honest it would be much better going with a r33 gtr block wouldnt it?? unless the crank magically strokes it to like 7 ltrs 32-34 psi wont get you 2000hp

Quote: Originally Posted by SKIDZ.1 guys my old man's mate is starting his new project. will be a rb30 in a hq panel van. as far as i know now! he will be running rb30 block rb26 head custum 900hp rated turbo's x2 his using a 4 bolt main crank shaft out of a truck engine will have pistons and rods all the goods he wants to run around 32-34 psi out of the engine- aiming for low 8's (apparently)!! engine will set him back around $25,000--$30,000 ?? so my question is, can a rb30 even handle 2000hp? to be honest it would be much better going with a r33 gtr block wouldnt it?? lol RB30 (even if it is twincam) making 2000hp...... you would NEED something stronger than a standard R33 GTR block..there's nothing special about a 33 block, I don't even think an N1 block would be much better Get a GT500 spec block Also look into getting a dry sump setup ($5000 right there for a quality setup to handle this crack pipe power) etc etc -OR- Call up ACTIVE AUTOMOTIVE in WA, get Tassone to build you a bombed V8......... Some original photos have not been recovered yet.

hahahaha, now ive *****en heard it all! this site never ceases to amaze me!

tell him to pour oil into the intake of the turbo worked for me

Sounds like your dad's mate is talking out of his arse. Probably is building an RB30.. but his story is obviously exagerated to all hell to try and impress you. By the looks of it - it has.

listen boys this is what i have been told, i dont know if his talking out his ass, when he told me this i said the exact same thing i doubt it. and obviously im right its not gonna happn. just wanted to know for myself. and yeh he said he's mech said he his better off puttn a 4bolt main truck crank lol again i was thinking truck engine crank in a rb30

the question should actually be can an RB30 make 2000hp

666hp per litre...... Does Nitro even support that kind of hp/per litre

ah can a rb30 make handle same **** man. atleast now when he talks to me about it i know the ****s just full of it lol. i have no idea if it could be true or not, i havent had 40gs to spend on a *** vl b4 so hence lack of knolege about this setup. neva had to do research on it.

maybe he ment 200hp lol

doubt we will ever see an RB30 go anywhere near 2000, its not a 2jz ignore what your dads mate said, hes probly just talking straight out of his arse. i had a guy approach me randomly one night when i was putting the bins out, telling me about his GTR that runs 80psi, and runs 8.2 down the quater, but hes gonna buy new turbos that can run 120psi, they were special race turbos. might be a relative of the bloke you know... Some original photos have not been recovered yet.

I'd estimate that MRPSI's engine would be well over the $100,000 mark to build. That has nearly double the cubes and twin GT47's running around 30psi. As for racing it and running a time... how long have you got to get it on boost? Does that bring this $30,000 3 litre into perspective?

Oh ben that must be the same friend on the people that say it's 35psi from each turbo in a twin turbo set up so it's running 70psi of boost ;-)

or his stories might be relevant to his brain capacity... ie... out of this world ***in ****. wat a dumb **** Some original photos have not been recovered yet.