Hi all, For sale I have an RB25 head, comes with everything apart from rocker covers. . VCT has been welded up, ready to bolt onto a RB30 block (retaining the VCT) The head has just been fully serviced, valve seats cut, decked, crack tested etc. . (I have the receipt) Head has a very mild porting job to remove casting marks, and it has also been ground out to fit bigger cams. . The only thing that the head needs is a rear welsh plug, as I removed it as I was planning on running a Spool head to sump oil return kit. . Asking $700, it is in brand new condition, hasn't been used since service. . I also have a custom plenum which has cost me $800 dollers that I will let go for $500. . It is brand new and has never been used. (it does not come with the 80mm throttle body, however if it is wanted you can have it for $200, also brand new). . The head comes with stock cams, however I have some brand new custom cams, 264 10.7mm intake and 270 10.2mm exhaust. I will sell these for $850 if wanted. Also have injectors and fuel rail :) $200 Also have required gaskets you can have (intake, exhaust) Note: The head comes with lifters, I just haven't put them in since the service. I also have the cam angle sensor. Some original photos have not been recovered yet.

ill give u 500 for the head plus postage & handling cheers, why no rocker covers if interested ph jamie [phone removed]