just done up my vl turbo up a bit and its spittin oil out of the rocket cover breathers iv just got a fillter on the bit. It used to run into my air intake because of the intercooler pipeing and pod install. iv just put a air filter on the breather bit . do i have to put on a oil catch can? or is there another way around it? It only does it when boosting over a bummpy roads.

Get some fuel line, Connect it to the breathers and run it to the ground. Now, me and the mad scientist got to rip apart the block... and replace the piston rings you fried. Some original photos have not been recovered yet.

Go the custom catch can. Gatorade make quality units

Catch cans are over rated for sure, just run fuel hose straight to the ground Some original photos have not been recovered yet.

[QUOTE] Quote: Originally Posted by TURBZ Get some fuel line, Connect it to the breathers and run it to the ground. Now, me and the mad scientist got to rip apart the block... and replace the piston rings you fried. [/QUOT w What piston ring u talking about Some original photos have not been recovered yet.

rocket eh... Richard Branson might interested in ur car!

Quote: Originally Posted by speedracervl rocket eh... Richard Branson might interested in ur car! whos richard branson?

[QUOTE=group3t] Quote: w What piston ring u talking about thats a quote from fast and furious and richard branson is the owner of the 'virgin' franchise Some original photos have not been recovered yet.

[QUOTE] Quote: Originally Posted by calais_vl Quote: Originally Posted by group3t thats a quote from fast and furious and richard branson is the owner of the 'virgin' franchise lol thats right

Im using a coke bottle with fuel line off the rocker. Just cable tied it under the manifold. Then run the hose in there. Then when its full just pour it back into the engine. Cheers

ROCKER DAMMIT! ROCKER!! NOT ROCKET. Thanks.

lol

ha ****ing funnie u rocker

no hes being serious, its rocker cover, not rocket lol it doesnt have rockets underneath it i looked under mine was disappointed Some original photos have not been recovered yet.

u sure? myn goes like a rocket Some original photos have not been recovered yet.

so does mine, but no theres none under there and yes im 100 percent sure its called a rocker cover "Rocker Covers, in relation to the internal combustion engine, are covers that are bolted on over rocker arms. Called a valve cover in the United States.[1] In early engines, these covers did not exist. As the rocker arms are critical to having the intake and exhaust valves operate, it was necessary to keep them constantly oiled. With these early engines, they would have to be frequently oiled as the oil was constantly being thrown off or contaminated with dirt from the outside environment. The rocker cover was created to both keep the oil in, and the dirt out. This part is now found on virtually every existing internal combustion engine today."

Quote: Originally Posted by group3t u sure? myn goes like a rocket I can't believe your being serious Some original photos have not been recovered yet.

I have a oil catch can. FYI Some original photos have not been recovered yet.

Quote: Originally Posted by 3L-JETT I have a oil catch can. FYI will it fit a rocket??? Some original photos have not been recovered yet.

lets hope so or the oil catch can will have nowhere to go, goodluck Some original photos have not been recovered yet.