Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗
Hi everyone i would like to introduce my company to everyone on CalaisTurbo, ProTig Fabrications specializing in parts for RB30's and VLT's.
Here are some of the products on offer!
Custom RB30 Race intake manifolds ,complete with Billet 80mm throttle body
$1250
(A few changers are being made to the next one)
Custom twin feed 14mm fuel rails,
With either -an fittings or barb fittings.
$250 ($150 with plenum purchase)
Complete custom 3inch aluminum Intercooler piping, with silicone joiners and t bolt hose clamps. to suit 600x300x75/100 cooler and the above plenum
$500
Intercoolers can be arranged for 220 extra for a 600x300x76
Under car aluminum surge tanks,
Complete with PTE 90* -6an push on fittings, in choice of of either blue/red or black/silver
$375 in either twin or single outlet,
Custom Polished aluminum catch can made to suit where ever you like.
choice of barb or -an fittings, complete with filter choice of red or blue.
Barb fittings $200
-6an straight push on fittings choice of blue/red or black/silver $250
Fuse box one, -6an
Chassie rail one -8an
Custom alloy airbox Complete with lid
to suit either 4"/3" pipe or a AFM,
$240
Custom rb30 rocker covers,
Number of choices here, these prices are you supplying the cover other wise add 50 ontop for a core charge,
1)-6an fittings welded on in std position $50 +post
2)Lines welded, Filled and linished with -6an fittings welded in std position $100 +post
3)Lines welded, filled and linished, old fittings welded up and linished flat, -6an fittings welded to the back of the rocker cover
Below is number two with -8an fittings and polished
this one is a work in progress, but has had the lines tig welded up, Holden linished off, factory breather holes filled, and then -10an fittings welded to the rear of the rocker cover. It is also useing 180degree -10an proflow push on fittings.
two PTE proflow -6an 90/120degree push on fittings choice of either blue/red or black/silver 60/70
can arrange to have these Polished, PoJwder coated or painted 2pac also for extra. And also larger fittings
Keep an eye on this thread as we will be adding more products constantly.
Pictures of all items will be up soon.
Contact can be made through either of the following
PM
MSN: [email removed]
or call/SMS me on [phone removed] please no calls after 7pm but.
Cheers Trevor.
Some original photos have not been recovered yet.
0 likes
will you be doing any packages with plenum/throttle body/fuel rail/cooler/piping to suit?
0 likes
Plenum's and intercooler piping sound good. Do you have any pics of your products.
0 likes
cant wait to see some pics very keen on surge tank
0 likes
trev u sly prick lol i like your rocker cover ideas, i want pics dude....good luck
0 likes
Here is a little sample of ProTig's welding:
Some original photos have not been recovered yet.
0 likes
Quote:
Originally Posted by boosted_wagon
trev u sly prick lol i like your rocker cover ideas, i want pics dude....good luck
i cant take credit for them you know that, talk to me on msn later i got a couple things to discuss with u :),
Thanks for the pics Tim :)
heres some more pictures of the lower control/trailing arms i did for Tim using ETM/duz360's brakets.
.
Will have pictures of everything within the next week,
sorry for the delays.
Some original photos have not been recovered yet.
0 likes
11-04-09, 16:30 GMT+10#10 Some pics of the Intercooler piping
with this one the goal was to have the cooler completly hidden, the AC is removed and the cooler is a 600x300x76 with 3" inlet/outlet, the goal was achieved :)
obviously being custom piping can be made to suit with ac and the cooler hanging down.
Can i get some feedback on what people are most interested in as i will make a few of each so that they are in stock
Also this are custom parts so if u wish to have things changed around slightly that is not a a problem, so if u want bigger fittings or what not just let me know and ill adjust the price accordingly if needed.
Some original photos have not been recovered yet.
0 likes
11-04-09, 16:37 GMT+10#11 Is your intercooler piping a no holes type and are you willing to ship to NZ ?
0 likes
11-04-09, 17:22 GMT+10#12 for the plenum as pictured above it requires one hole cut just in front of the battery tray, but if your willing to run a thermo fan i can make it no holes, may cost a little bit more sure to needed more bends.
unless your wanting it to suit std plenum? then i can do no holes easy. ill have to work out the cost difference as it needs more pipes/bends but would be done in a smaller diameter pipe (2.5"). I'll have to find out what shipping to NZ would be as i hadent factored international shipping into the 450 delivered price and id add the diffrence.
PM me with what you are after, ill look after you best i can.
cheers Trev
0 likes
11-04-09, 17:57 GMT+10#13 cant wait 4 da pic's ill be getting some stuff aswell
0 likes
11-04-09, 18:52 GMT+10#14 what is everyone most interested in?
as i will work on getting pics of those first.
if theres anything else anyone wants just let me know and ill make it up for them if i can.
0 likes
11-04-09, 18:58 GMT+10#15 Quote:
Originally Posted by ProTig
what is everyone most interested in?
as i will work on getting pics of those first.
if theres anything else anyone wants just let me know and ill make it up for them if i can.
interested in catch can where the fuse box would normally sit. When i smoothd the engine bay I removed the bracket that use to hold it. would i need this to fit your catch can?
0 likes
11-04-09, 19:31 GMT+10#16 normally i have a tab there and that is screwed onto the braket, then two other tabs near the rail that get screwed down. i can make the tab a longer so that it will reach down then it would just need a small hole and screw.
heres some progress pics of one im working on atm, im just waiting on the fittings to arrive for it.
will have pictures of it finished tuesday night,
pretty much this is what its like
Some original photos have not been recovered yet.
0 likes
11-04-09, 20:30 GMT+10#17 Keen to see some pics of the fuel rail.
0 likes
11-04-09, 20:44 GMT+10#18 sorry for the crappy pic ill get a better one soon.
those PTE Proflow -6an 120 degree push on fittings are not included in the price but i can source them for extra,
Some original photos have not been recovered yet.
0 likes
11-04-09, 21:24 GMT+10#19 will those injectors fit a normal RB30 fuel rail?
0 likes
11-04-09, 21:27 GMT+10#20 Quote:
Originally Posted by BONSVL
will those injectors fit a normal RB30 fuel rail?
no sorry they are a 14mm-14mm oring type injectors.
the above fuel rail will bolt onto std runners.
0 likes
This discussion is closed to new replies.
