22-02-09, 10:19 GMT+10#1
Hey,
Just an EOI at the moment because once my brothers car is out of the shed im going to be very tempted to put mine there and start pulling it apart and selling it all off.
Nothing will be sold at the moment, im just putting this up to see how much interest there is out there at the moment for the parts ive got. When im ready to sell a new thread with pics and everything will be started or people who have shown interested will be PM'd.
With all this gear it made 244rwkw on 14psi
- COMPLETE HOTSIDE PACKAGE - 9SEC SETUP
*Genuine Garrett T04Z (done about 2000km) with custom .70 rear housing (still T4 flange). Perfect for a manual car, comes on boost like a dream and pulls like a steamtrain. Turbs has a few little nicks out of the rear wheel but its still perfect and works like a dream, never had any dramas n will last forever still
* Genuine Tial 44mm External Wastegate with 10psi spring (1000km old)
* Oil and Water Lines to suit.
* Stainless monsta Highmount Manifold which has had the T3 flange cut off and had a T4 split pulse flange welded on instead and Vband for gate.
* 3.5" Dump pipe. Single piece from Turbo to Cat
- $2700
* RB30 head with Crow cam TX2/JPC Stage 2 Cam and Crow Cam Heavy Duty double valve springs and adjustable cam gear. Perfect condition, 1000km old. $SOLD
* R33/RB25det 5 Speed gearbox and tailshaft(may need a new unijoint or centre bearing), perfect condition $SOLD
* Diff - 31 Spline Moser Billet Axles and 31 Spline Full Spool, still with drums on the back. 1000km old. $SOLD
* Microtech LT12 with 6 Coil Setup and Hand Controller with Complete Loom $SOLD
* ETM (Leighs) Inlet Manifolds with XF Throttle Body $SOLD
* 3" Cat-back exhaust with a single muffler after the diff $SOLD
* Siemens 575cc injectors (14mm oring) w/ Red Anodized Fuel Rail to suit $SOLD
* Sard Fuel Reg $120
* Catch Can $SOLD
* 3" Alloy Intercooler piping $SOLD
* Undercar surge tank (one of the first ones, not the jdcustom one) $SOLD
* Alloy Distributor Cover $SOLD
* GKTech 600x230 intercooler (perfect condition, one side sprayed black) $150
* Black w/prismatech Rocker cover with speedflow fittings $150
* N/A plenum with polished top and ported to suit XF t/b (t/b included with VL TPS) $150
* 3" Alloy intake pipe with K&N Pod - $100
* N/A bottom runners - $30
* Battery Bag - $SOLD
As you can see lots of good quality parts here. This car was going to go 9's manual this year but im over the car at the moment and need a change.
I know there has been no prices put up, but thats because im not 100% stripping it yet so just post here if you would be possibly interested for something if the price was right.
EDIT: I put up rough prices, if i do decide to strip it the price would prob change a bit, i'd have to work it all out. Just to keep the mods happy for the moment tho.
Pic:
surge tank first up (could be sold, ill let you know)
- Microtech and all the gear (the only thing isnt pictured is the complete loom for the engine bay but everyone knows what it looks like)
- Genuine Sard Fuel reg
- 3" Alloy intake with K&N Pod, i used it on my car when it was both high and low mount setup
- Battery Bag $SOLD
- Standard N/A bottom half runners. Had them sandblasted before they went on my car, still pretty clean, a few finger marks here n there
- All the turbo gear
- Rocker Cover
Some original photos have not been recovered yet.
0 likes