As you can read.
I'am selling all my bit's which is, kyle's unreal exhaust manifold (Wrapped) only done less than 3,000klm's. T03 flanged
TURBOSMART 48mm External wastegate
All water and oil line's to suit Most garret turbo's, GT30-35 ect
And a full 3 1/2 inch exhaust from dump pipe to rear bumper with one res at rear.
Reason for selling is no longer have the car.
All you will need now is turbo and this will all bolt up.
Chasing $2900 for the whole lot, will post interstate at buyer expence.
Anymore Question's please ask, pm or
[email removed]
[email removed]
[phone removed]
Thanks kids
WHITEY
Some original photos have not been recovered yet.
hay do you have any pics of the full exhause system and is that a front mount crank angle sensor in that pic if so how can i find out more about them thanks
Yes i have more pic's mate, how many would you like.
And it is a cam angle sensor off a RB25 fitted and modified to a RB30 for cam referance.
More info would be to ring us @ EFI PERFORMANCE. check sig.
Cheer's whitey
Some original photos have not been recovered yet.
yea any pics would be good. how loud would you say the exhause is? and i dont know if you know but do the flange size change the bigger the turbo or is the t03 flange good for most? Is that a hard thing to do to make the cam angle sensor work because my distributor is only there for the crank angle sensor so would like to take it off and put cam angle sensor thanks michael
Ill pm you micheal. this exhaust will bolt up to the rear of any GT30/35 series turbo with a 4 bolt rear, but also you will need the exhaust manifold and wastegate to suit the whloe system mate, using anything other than a 6boost manifold it wont bolt up.
With the cam angle sensor, we modified and took 3 months of development to design this setup, its not as eazy as it looks.
Quote:
Originally Posted by Cocopopz
are u selling the bracket to fit the twin cam cam-angle sensor on
Yes but it comes in a whole kit, with wiring, ecu (nistune) coil's and coil mounts to suit RB30.
i was looking at the whole thing manifold and all. i have got t03/t04 turbo on there now and wanna know when i upgrade to bigger turbo will the t03 flange still work
Yer the manifold is T03 flanged mate.
Pic's are on there way.
Cheer's
KEEP IN-MIND THIS EXHAUST GOES UNDER THE DIFF NOT BETWEEN THE BODY AND TOP OF DIFF DUE TO BEING TOO BIG. BUT BOLTS UP FINE JUST BE CAREFULL WHEN ON HOIEST.
.
Some original photos have not been recovered yet.
