THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion

Forum Home›Technical help

Technical help

304 into VH SL/E

Started by atrail308 vbmenu_register("postmenu_1754027", true); · 4 Mar 2008 · 7 replies

Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.

atrail308 vbmenu_register("postmenu_1754027", true);Archived member

04-03-08, 12:11 GMT+10#1

Hello all, A quick question to all who have done a similar conversion to this... What accel cable did people use, the VN V8 one is too long, which means there is about 20mm too much slack at the throttle body...

0 likes

xeturbo vbmenu_register("postmenu_1754220", true);Archived member

04-03-08, 15:14 GMT+10#2

im pretty sure if you go to a bike shop you can buy the little ends of the cable that slide into the throttle body, then you can simply shorten the cable and add the new end on. just a suggestion, but i would of thought the vn cable would work.

0 likes

Lawso vbmenu_register("postmenu_1754278", true);Archived member

04-03-08, 16:01 GMT+10#3

Using the STD VN V8 one in mine. Sounds as though you may be missing the rubber bush that goes through the firewall?

0 likes

TIDYVH vbmenu_register("postmenu_1754633", true);Archived member

04-03-08, 19:49 GMT+10#4

mate i used a vn v8 cable, cut it to lengh and used a small electrical wire clamp, the ones that come in a plastic covering with two screws ontop. i just removed the insulation plastic and clamped it down. works a treat

0 likes

C H O P S vbmenu_register("postmenu_2286107", true);Archived member

17-09-09, 19:03 GMT+10#5

hey i bought my vh sle with a 304 but i dont know what kind of cable it uses but try make up a bracket so it takes up the rest of the slack... Or maybe what Lawso said u probably are missing a rubber or bracket somewhere

0 likes

Injection vbmenu_register("postmenu_2287253", true);Archived member

19-09-09, 14:35 GMT+10#6

I used the EFI V8 cable in my VL when I did the transplant in that. Went straight in and fitted no worries..

0 likes

mrvkcalas vbmenu_register("postmenu_2287284", true);Archived member

19-09-09, 15:40 GMT+10#7

i used vn v8 cable no probs

0 likes

JoKickAss vbmenu_register("postmenu_2287299", true);Archived member

19-09-09, 15:52 GMT+10#8

vn v8 cable but modified the accel pedal for the end to fit on snug

0 likes

Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.

304 into VH SL/E

Who’s online