hey just went through 10pages of search but couldnt find what i was looking for.. very soon going to rip off my mf5 and replace is with a mx7 which im still looking for just wondering if someone can give me a piece by piece list of the exact things i need for the conversion.. thanx in advanced jo,

cant help you with that but have you thought about going R33 box?

i think you need to do another search. There are plenty of threads on this

tailshaft yoke is bigger, sandwhich plate is different, starter motor is different, flywheel and clutch are different... i have some of these parts if your interested!

Quote: Originally Posted by Sick-Red-VL tailshaft yoke is bigger, sandwhich plate is different, starter motor is different, flywheel and clutch are different... i have some of these parts if your interested! sweet, ive got one linned up just wanna no what i exactly need.. isnt the slave and hydralic line different aswell?

line is the same 100% slave im not sure if they are the same one thing i would like to know also is it possible to use the gearbox mounts/ crossmember off the mf5 on the mx7 im pretty positive you can.

Keep your 9.5" flywheel/clutch/starter motor setup. Larger range of clutches and not needed to change..

^^^^ thats correct, and you can use all the clutch s from the r33 turbo range so you can still get a very good clutch.

is can u use an mf5 tailshaft with an mx7?

^^^ im 95% sure you can't

can u use the clutch out of a mx5 and put it into a mx7???

You CAN run a 9.5" flywheel (MF5) with a MX7 box. just make sure you're using an N/A (or turbo auto) starter motor. You need: -MX7 box and shifter -MX7 tailshaft -MF5 sandwich plate -MF5 (or turbo auto) starter motor -clutch/pressure plate to suit 9.5" flywheel (MF5, anything from the Skyline range) -MX7 clutch fork/bearing -MF5 flywheel That should be all you need. Quote: Originally Posted by vlcjet can u use the clutch out of a mx5 and put it into a mx7??? No, an MX5 is a Mazda. But seriously, you can only use the clutch from an MF5 in a MX7 if you are still using the MF5 (9.5") flywheel. Some original photos have not been recovered yet.

Quote: Originally Posted by MARMO. line is the same 100% slave im not sure if they are the same one thing i would like to know also is it possible to use the gearbox mounts/ crossmember off the mf5 on the mx7 im pretty positive you can. yes you can it just mounts to the body in the other holes (there is 3 holes on each side of the tunnel) cant remember which one mounts forward or backward but they deffinetly fit both boxes...

They'll use the same holes between MF5 and MX7; its one set for autos and one set for manuals.

hmmm you sure, if so ill stand corrected.... but even still the cross members are interchangable..

Defently use your 9.5" flywheel/starter like matty was saying. Heaps more options when it comes to upgrading your clutch.

+ when it comes time to change your starter its alot cheapper and easyer to get one to suit the 9.5 inch clutch

Both rusty and PHS, on the money re: clutch options. Sick-Red-VL: you're right regarding the crossmembers, and AFAIK there are a set of holesw for manual and a set for auto. But it doesn't really matter, it'll line up with one or the other. Some original photos have not been recovered yet.

With the cross member, you can use it, but you will ned to make up some spacers to sit it down a litle bit. Can use Mf5 tailshaft, but will need to change the yoke to an Mx7 unit. Can get them from hardy spicer for 100 bucks. Use Mf5 clutch, flywheel, starter and sandwhich plate as mentioned Accelterator cable, i think you can get the mf5 one to fit onto the mx7 speedo sender

All VL RB30 speedo cables are the same.