Hey guy's i am totally new to the audio part of cars and everything i picked up 2 6x9's sony explode to be exact they say 200w max and my mate gave me his old amp 4 x 100wrms and i have a head deck that says 4x50 someone said that it will be giving the 6x9's just 50 watt but i wanted to see if i could run them through the amp and give them like 180 watt or something like that, that wouldnt kill them. please help guys i dont know what i am on about lol Cheers

yes u can run them through the amp those sony explodes wont be 200 watt rms there only likely to be about 50 anyway

ok so even though the amp is 400 watt rms it wont just pump 400 to each one and blow them up will it ??

if you plan on running the amp then you would use the rca outputs so the 4 x 50 means nothing, the 200w rating of the speakers realy means **** you need the rms is the 4 x 100 w amp at 2 ohms or 4 ohms you wont have a problem running the 2 together unless you tune it wrong you will know when the speakers sound like there going to blow up anyway the amp can run 4 speakers delivering 100w rms to each speaker if you bridge the amp you get more power, but you can only run 2 speaker to do this would be good for subs you always have to have the same ohms when quoting amps and speaks cause an amp at 4 ohms will say has 25 w rms then a 2 ohms will have 50w rms and if its able to run 1 ohm it would have 100 w rms

cheers for your help guys now i just have to figure out how to hook everything up Some original photos have not been recovered yet.

use common sence and if in doubt ask somone

if ya wana come for a drive to sydney i can hook ya up Some original photos have not been recovered yet.