Hey Guys Over the past number of months, we have developing a large range of new products. This includesTurbo Inlet FlangesTurbo Dump Pipe FlangesStainless Steel Gasket KitsVBand Clamps and Clamp KitsStainless Steel Gasket Kits A new edition to the line up, is the new range of Stainless Steel Gasket Kits to suit a wide variety of turbochargers. Each Stainless Gasket, is laser cut then stamped with appropriate profile, to make sure metal on metal seal is perfect. We currently have 3 kits in stock at the momentT25/28 - Dump Pipe and Turbo Inlet GasketGT30/35 - Dump Pipe and Turbo Inlet GasketT04 - Turbo Inlet Gasket and Oil Feed/Drain GasketsThese are in stock NOW, and ready for immediate delivery T25/28 Gasket Kit GT30/35 Gasket Kit T04 Gasket Kit only $24ea plus Delivery Turbo Inlet and Dump Pipe Flanges They have been laser cut, then CNC machined to remove any sharp edges and also to mill any contours and hole positions for mounting. This has taken us the last few months to perfect and get into full swing production. We have incorporated a machined lip into the dump flanges, such that, the person making them dump pipe, can fit the piping into the port, then weld. This can be seen in the pictures attached. TURBO INLET FLANGES T25/28 Inlet Flange - Laser Cut - CNC Machined Finished - Threaded Bolt Holts $29.50ea T3 Inlet Flange - Laser Cut - CNC Machined Finished - Threaded Bolt Holts $33.95ea T4 Single Inlet Flange - Laser Cut - CNC Machined Finished - Threaded Bolt Holts $36.50ea T4 Divided Inlet Flange - Laser Cut - CNC Machined Finished - Threaded Bolt Holts $36.75ea DUMP PIPE FLANGES T25/28 Single Port Flange - Laser Cut - CNC Machined Finished $39.50ea T25/28 Split Port Flange - Laser Cut - CNC Machined Finished $44.95ea GT30/35 Flange - Laser Cut - CNC Machined Finished $37.50ea GT30/35 to VBAND Flange - Laser Cut - CNC Machined Finished $51.50ea VBand Clamps and Clamp Kits We also have a new range of VBand Clamps and Clamp Kits to suit a wide variety of purposes. VBand Clamps are available in the following sizes2.5"2.75"3"3.5"4"VBand Clamp Kits are available in the following sizes2.5"3"3.5" (2 weeks away)4" (2 weeks away) RRP PRICING2.5" - $15.842.75" - $17.663" - $19.473.5" - $23.104" - $27.72CT PRICING2.5" - $13.992.75" - $15.63" - $17.203.5" - $20.414" - $24.49VBand Clamp Kit Pricing2.5" - $65kit3" - $65kitAll items are in stock and ready for immediate delivery. Prices do not include delivery charges. Please contact us for delivery costs on combined purchases. email: [email removed] or PM us Thanks Tarek RACESPEC SALES TEAM www.racespec.com.au (http://www.racespec.com.au) [email removed] Some original photos have not been recovered yet.

any chance that u have GT35r internal wastegate flangers too?

Do the GT30/35 to VBAND Flange come with the Vband clamp? and the other pit you weld onto the exhaust?

Quote: Originally Posted by MARMO. any chance that u have GT35r internal wastegate flangers too? Hey mate These are being laser cut and CNCd as we speak, separate screamer section for the wastegate, similar to the T28 Split Port Flange. Quote: Originally Posted by [T]Matty Do the GT30/35 to VBAND Flange come with the Vband clamp? and the other pit you weld onto the exhaust? We can supply the extra VBand Clamp and Flange to suit GT30/35 to VBand - $51.50 Flange and Clamp - $44.50 Express Postage - $11.50 All items are in stock Thanks Tarek RACESPEC

Quote: Originally Posted by RACESPEC Hey mate These are being laser cut and CNCd as we speak, separate screamer section for the wastegate, similar to the T28 Split Port Flange. We can supply the extra VBand Clamp and Flange to suit GT30/35 to VBand - $51.50 Flange and Clamp - $44.50 Express Postage - $11.50 All items are in stock Thanks Tarek RACESPEC sounds good :) my turbo is has a slight valley so to say in the devider, do i just get the back machined till its all flat? think it would only need 3mm or so taken off

The 3540 IW xforce dump pipes have a protruding face on the flange that goes in the valley to seperate the turbine and wastegate. Will these flanges have those as well?

Quote: Originally Posted by Dansedgli The 3540 IW xforce dump pipes have a protruding face on the flange that goes in the valley to seperate the turbine and wastegate. Will these flanges have those as well? No they wont, as this would mean lasercutting a 20mm flange, which can not be done. Then CNC machine down the remaining metal. Thanks Tarek RACESPEC

hey Tarek whats the ETA on the flangers for the internal wastegated gt35r?

Quote: Originally Posted by MARMO. hey Tarek whats the ETA on the flangers for the internal wastegated gt35r? At this stage about, 3 weeks, we are waiting for stock to come in, then we can get it laser cut, then CNC machined Thanks Tarek RACESPEC

does anyone have have any solutions on filling the valley between the dump and wastegate? because this would reduce it a big exhaust leak would it not?

Quote: Originally Posted by xeturbo does anyone have have any solutions on filling the valley between the dump and wastegate? because this would reduce it a big exhaust leak would it not? get your exhaust housing milled down or you could build it it up with weld where its needed and grind it back

Do you have any exhaust flanges for the old stock T3. Also do you have a price for a 3" V-band kit? I had this set up on my last VL (over 10 years ago now and it worked a treat!)

We are looking at getting the older style T3 dump flanges made at the moment 3" Vband CLamp Kits are $65ea Thanks Tarek RACESPEC

Also another quick question, are your exhaust housing flanges mild steel or stainless?

They are Mild Steel Thanks Tarek RACESPEC

Just wondering if those 35/40 internal wastegate flanges are available for purchase yet? And if so how much?

How Much Longer On The 35/40 Internally Gated Flanges

im after one aswell asap

hey guys we sincerely apologise for the delay on the XR6T flanges, CNC issues is what has been holding us back, will be done ASAP Thanks Tarek RACESPEC

do u sell t3/t4 adapters so i can bolt a t4 to my t3 manifold if so how much if u could pm me that would be great, thanks :)