12-11-07, 12:55 GMT+10#1
Hey guys,
Got some of my gear up for grabs as im changing my setup slightly.
Microtech LTX-8 with 2nd hand short loom and the Microtech dash. Mapped to suit VL. Has had a tune it in it before from another car which had a pretty big setup.
The 2nd hand loom is still pretty good, im sure it will still be fine to use, just the wires have been cut a bit, depends how fussy you are. New looms are only about $150 anyway but this one will still be fine.
Also the Microtech dash needs a new plug put onto the end of it, no drama at all $2 from repco.
I've been offered $850 for it all but looking for more seeing as though the microtech dash alone sells for $500 from VPW.
Also the injectors (Bosch 363's 580cc) - I bought them off someone who had used them for 1000km's but im now slightly changing my setup and i these won't do the job for me.
I've just had brand new pintle caps and upper and lower o-rings put on so they are ready to go in and use.
The rail included is for the injectors and a VL but the mounts on the rail dont quite line up with the VL mounts so you might jst need to remove and reweld the tabs on - easy fix.
If you want to run these with the microtech it will need to be remapped to suit low impedance injectors - no drama at all, microtech will do it for you for around $150.
For the rail and injectors im looking for around $550.
Or we can prob work something out for the lot.
Will swap for things like Garrett 35/40, or highmount manifold or another microtech w/ coilpacks etc...
Pics will be up later.
Reply here or PM me if you have any q's....
Tim
0 likes