Hey Guys, if you have purchased a product, be it manifold or anything else from me, and would like to show your appreciation by posting up some pics or a dyno graph and some comments, please do so:o) And to anyone else, please keep your questions or comments short so as not to turn this into a long Q and A thread. Cheers.....................6BOOST

I wanted to be the first :D. Kyle was the fabricator of my intercooler piping, great job (although i don't believe it's a daily service of his) Also supplied me with the Mr Turbo (Custom billet centre) ball bearing T66, for whom he is a distributor. Great knowledge and experience, and overall a great guy. I plan to upgrade to a 6BOOST exhaust manifold by the end of the year. I've run 11.65@117mph with this package, on pump and DOT slicks. A few pics: AND THEN.... an upgrade... to Kyles 6Boost Manifold with a 35/40 and a tial gate... etc... not only looks unreal, but feels as good as it looks, and should be very promising once my new Keas auto goes in and we throw it on the rollers.. Some original photos have not been recovered yet.

heres a few pics of my old setup and my new setup Some original photos have not been recovered yet.

I purchased a "streep/strip warrior" package (manifold, turbo an gate) from kyle and couldnt be happier with his gear. car made 395rwhp on 16 pound on a conservative tune and with my new box going in soonish im looking forward to seein wat this package can really do. will keep u posted kyle ;) (the bay is still pretty messy) Some original photos have not been recovered yet.

ok here is my crapper. initial run in tune see it made jsut under 300rwhp on 9psi gate pressure and a 5000rpm limiter. Since then Ive been working with kyle on other drivetrain mods for last few months and its almost ready to go again. Some original photos have not been recovered yet.

Low-mount setup Some original photos have not been recovered yet.

here's mine, will get some close up ones, and will have the dyno sheet when the auto's back Some original photos have not been recovered yet.

Here is a few pics of the manifold kyle mae me to suit my hks t51r turbo, kyle was more then happy to help me out as i wanted the wastegate to sit in a certain spot and i wanted to be able to fit a 4" exhaust straight off the the turbo and be able to fit between number 6 runner and the rail as u can see it fits perfect :) Some original photos have not been recovered yet.

It's only something small but Kyle was more than willing to help me out, he made my 3" dump pipe on my internal gated GT30 setup on standard VLT manifold, great job and fixed up my cooler piping to help suit. Some original photos have not been recovered yet.

Heres a few of pics of work in progress. RB25 DET, Forged internals , GT35/40 with a 6Boost Manifold & Plazmaman Plenum. Should be finished and ready for mapping in a few weeks or as soon as i can get the dump pipe fabricated. Some original photos have not been recovered yet.

Nice guy .. always willing to help and give out info when you need it.

Just waiting to be mapped at Abbey Motorport , I will post up the figures when it's done. Thanks Kyle for all the info . Cheers Neil Some original photos have not been recovered yet.

A pic of a GT35 on a lowmount with dump setup, it was made not to look pretty but to do a job and to be easy to get out if I decide to do a change down the track. It fits the bill nicely with handy features such as a flange on the wastegate pipe which enables me to drop the dump all the way to the cat without upsetting the V-band on the gate. It will also allow me to fit a race pipe with a minimum of fuss if the need ever arises. Overall system up to the cat. Flanged wastegate pipe to make for easy removal of both the exhaust and/or the manifold. Some original photos have not been recovered yet.

Well while the gear is off my car temporarily... ;) i thought i'd take a few snaps to better reflect the quality of Kyles work. This is a hightmount 6BOOST manifold with Garrett GT35, with the gate incorporated into the exhaust housing. Only too easy to unbolt as one and take off the car should the need arrise ;) (broken engine). hehe Ollie Some original photos have not been recovered yet.

i recently recieved my t4 flange split pulse exhaust manifold from kyle, his work is absolutely awesome and would recomend him to anyone. thanks again kyle Some original photos have not been recovered yet.

Damn you, I want that turbo for my car!!!

Kyles hi-mount manifold with the heat coating, t04z and tial gate. I lost so much room in my pants when i put this thing on :) Some original photos have not been recovered yet.

heres a pic of mine ! thanks for turbo and manifold kyle Some original photos have not been recovered yet.

Here you go klye, the pic's i was sending you the other day.. Thanks so much as far mate... Some original photos have not been recovered yet.

again, t04z and hi mount heat coated manifold. looks the ducks nuts kyle cheeers Some original photos have not been recovered yet.