grr just finished putting in a working N/A motor and loom into the vl - now it wont start grr.. Pumps are priming All fuses ok Power is going to the coil Power is getting to the injectors But no power / spark is coming out the coil!! Have already tried interchanging working coils and even ECU's Grr HELP

spark at the plugs? sounds like the old CAS or the connection to it!

maybe its that difference in the series1 to 2 loom, some plug near ecu that runs to dash that have pink wires. 1 wire needs bridging or something. from memory it has 2 wires that are on seperate pins and on the other conector there is only 1 wire/pin. the 2 need joinin in to 1. someone else may know a bit more

check injector pulse. that will tell you if the CAS is working. check if the transistor is switching. sounds like a fun one. goodluck