Hey guys and girls was thinkin bout putting exstractors and exhaust on my car but now have been offered pretty much a full turbo conversion and im thinkin bout doing the conversion. I just want to no your tips,disagreements,personal experiances and anything that could help me in making my choice or helping me with doing the actual conversion to turbo Any input would be great and no crap please cheers Nathan

bro im about 2 do the same conversion.. cept i have the full motor.. ill be doing mine in around 5 weeks.. so if ya want ill pm u my number and when after i do it if u have any probs at all give us a call.. my dad and my pop are fairly well known mechanics.. they will be helping me.. and we are taking no shortcuts..

yer sounds good to me thats if i deside to do it. if im doing it i will be doing a full head swap with turbo plenum and and stock turbo

Keeping the bottom NA? Make sure you have .8mm gap plugs, makes a big difference... Also, make sure that the banjo bolt washers are new, or seal properly, as they can leak easy if not done properly

as jc said .8mm gap is good. and make sure you use a genune nissan head gasket... ive done this so pm me if you get stuck mate.

i have done a few,always do the gasket on a n/a conversion cos its common they blow out within days,using the turbo cam will make it a bit doughy down low compared to the na cam but will make it go alot better and also lessen chance of detenation, get a turbo fuel pump, some people say there the same there not!apparently the replacement pumps suit both but everyone i spoke to said they have different part numbers (bosch)

thanks guys any more info yous got