I'm deperately in need of the pin outs (wiring diagrams) for the 2 large electrical plugs down near the passengers feet in a vl obviously. Thanks in adavance. http://www.calaisturbo.com.au/attach...7&d=1145762986 (http://www.calaisturbo.com.au/attachment.php?attachmentid=13007&d=1145762986) Some original photos have not been recovered yet.

I think it's to do with the cruise control setup. Is the car a calais or does it have cruise control?? I'm still sussing the diagrams!! Cheers MiniVL

Yeah its a calais, and its not the cc, theres 2 plugs there.

my bt1 has them im pritty sure its todo with the auto ecu

The black plug goes to the instruments and ignition, the blue plug is for the auto ECU and also for the fuel pump relay. BLACK plug brown/red tacho pink ignition to ecu pink ignition to coil dark green water temp dark blue oil light or gauge brown alternator light brown yellow speed signal to ecu mind blank on the others at the moment blue plug black pink tps grey tps blue tps orange battery + single green on own fuel pump relay, these wire I am 100%, cant remember other exactly unless I was looking at them.

Quote: Originally Posted by BAS The black plug goes to the instruments and ignition, the blue plug is for the auto ECU and also for the fuel pump relay. BLACK plug brown/red tacho pink ignition to ecu pink ignition to coil dark green water temp dark blue oil light or gauge brown alternator light brown yellow speed signal to ecu mind blank on the others at the moment blue plug black pink tps grey tps blue tps orange battery + single green on own fuel pump relay, these wire I am 100%, cant remember other exactly unless I was looking at them. You Sir are a ****in Legend. Thankyou very much. Some original photos have not been recovered yet.

unreal.. get it wired in, plug in the laptop and you and me will hit the highway for some on road tuning..

lol ner I dont think so. Does someone else know what the remaining wires are Thanks.

What exactly do you need the wires for?? is it for an aftermarket ECU or an issue with the car.

Quote: Originally Posted by BAS What exactly do you need the wires for?? is it for an aftermarket ECU or an issue with the car. Yeah Im wiring in my ecu and theres a couple of wires I need to hook up, but I need to know what they are. Some original photos have not been recovered yet.

Quote: Originally Posted by calais25t Yeah Im wiring in my ecu and theres a couple of wires I need to hook up, but I need to know what they are. Hope this helps for the Blue Plug Black/white= a spilced joint which goes everywhere Dark Blue= to power shift switch ( the Dark Blue becomes white) Grey= Throttle valve sensor Dark Blue= Throttle valve sensor Black/pink= Throttle valve sensor Dark Blue/black= Warning lamps connector Dark Blue/ white= Throttle valve switch Light Green= Goes stright to computer Orange= Transmission detent switch Hope that gets you out of trouble Cheers Some original photos have not been recovered yet.