ROMAC has been synonymous in the industry for its large range of Full Floater Kits to suit Drag and Race Cars. They also manufacture a large range of - HARMONIC BALANCERS - SPOOLS - HIGH PERFORMANCE TIMING CHAIN SETS ROMAC 8200 SERIES FLOATING HUB KITS - 1500HP Limited Kit Contents:SpindlesHubsDrive PlatesEnd Caps and ScrewsBearingsSealsO-RingsAdj NutsLock WashersThey are available in both Steel and Alloy Construction. They don't come with Wheel Studs, Axles or Disc Rotors. When ordering, please specify the following:Major Diameter of the KitSpline CountAngleBolt PatternSteel Floater Kit - $1750 Alloy Floater Kit - $1925 ROMAC 8300 SERIES FLOATING HUB KITS - Pro Category Kit contents are the same as the above kit but all ALLOY, but they are limited inSpline CountAngleBolt Pattern8300 - Spline Count: 35 Angle: 60 Bolt Pattern: 5 x 5"8305 - Spline Count: 35 Angle: 60 Bolt Pattern: 5 x 5.5"8310 - Spline Count: 35 Angle: 90 Bolt Pattern: 5 x 5"8315 - Spline Count: 35 Angle: 90 Bolt Pattern: 5 x 5.5"8320 - Spline Count: 40 Angle: 60 Bolt Pattern: 5 x 5"8325 - Spline Count: 40 Angle: 60 Bolt Pattern: 5 x 5.5"8330 - Spline Count: 40 Angle: 90 Bolt Pattern: 5 x 5"8335 - Spline Count: 40 Angle: 90 Bolt Pattern: 5 x 5.5"8340 - Spline Count: 44 Angle: 60 Bolt Pattern: 5 x 5"8345 - Spline Count: 44 Angle: 60 Bolt Pattern: 5 x 5.5"8350 - Spline Count: 44 Angle: 90 Bolt Pattern: 5 x 5"8355 - Spline Count: 44 Angle: 90 Bolt Pattern: 5 x 5.5"5" Floater Kit - $3030 5.5" Floater Kit - $3190 We can also supply complete 8300 Series Pro Category Full Packages, please PM or [email removed] for pricing and availability ROMAC MINI SPOOLS ROMAC have a huge range of Mini Spools to suit a large range of diffs. The following MINI SPOOLS need to be used with a Two Part Centre Section Only.28 Spline Ford 9" - 4 Hole For Cross Pins31 Spline Ford 9" - 4 Hole For Cross Pins25 Spline Borg Warner - 4 Hole for Cross Pins23 Spline Banjo Centre - 2 Hole for On Cross Pin25 Spline Banjo Centre - 2 Hole for On Cross Pin28 Spline Borg Warner 79 Series Housing - 4 Hole for Cross Pins28 Spline Salisbury 10 Bolt - One Pin. Fit Factory Conical Shims10 Spline Early Holdens - EH-HRMini Spools - $149.95 ROMAC VERNIER CAM GEARS ROMAC has also started to manufacture a Huge Range of Vernie Cam Gears to suit a wide range of Engines, from Chev right through to Nissan and Holden. Specifications:Aerospace 7075 T6 AlloyRed Anodized FinishInfinite Adjustment of Cam PulleyEasy to read Scale in 2 Degree Increments10 Degrees Advanced or Retard OptionAircraft Spec Military Bolts and Washers RB30 - $230ea RB20/25/26 - $435set ($230ea) We can source the complete range of ROMAC products, so if there is something that you are looking for, that we have not listed, please PM or [email removed] Thanks RACESPEC SALES TEAM Some original photos have not been recovered yet.

We have also just been notified, that ROMAC have just released an SFI Approved Harmonic Balancer to suit the RB30 aswell. These are no longer made from steel, steel alloy is now used and they are anodized in the trademark ROMAC red. Production is about to commence, but as you can understand, there are limited supplies, as everyone is chasing them $310ea Thanks Tarek RACESPEC www.racespec.com.au (http://www.racespec.com.au) [email removed]

what is the benifit in a such harmonic balancer?

There are several reasons for using these units - Weight Reduction: Particularly when instant revs are needed. - Increased Harmonic Absorption - Increased Crankshaft Life Thanks Tarek RACESPEC

do you have a price on a romac balancer for a 215i 1997 holden v8?

Morgz Is it BLOWN or standard? Thanks Tarek RACESPEC

Blown atm.. if I remove the current balancer I think I need a replacement one, as I am pretty sure they replace the whole thing, with one to take the blower belt.

Hey mate ROMAC make 2 for the Blown Applications 0220/B - Sports All Steel $275 0220SA/B - PFM Steel Alloy $310 When ordering the Blown Balancer, you need to specify whether you want - Standard Factory Front Face - 6 Bolt Front Face Thanks Tarek RACESPEC Some original photos have not been recovered yet.

what about for n/a applications? thanks for all the help, prices and pics btw.. much appreciated.

Hey mate 0220 (as pictured) - Sports All Steel $269 0220AA - Pro All Alloy (larger Seal) $319 0220SA - PFM Steel Alloy $299 Thats for NA Applications for all Holen V8s. Thanks Tarek RACESPEC

can you get the Romac 31 spline full spool and 31spline axels for the borg warner diff? also, do Romac do a SFI approved balancer for the 2JZ?

love the look of the romac brakes,they would look good on my car:)

Troy Yes, we can offer the Maxi Spool Range from Romac to suit the Borg Warner. 31/90 Spline, uses Factory Bearings - Standard Spline Location $510 They only supply Full Floater axles, but they do sell the HY TUFF Axles by the meter Thanks RACESPEC SALES TEAM

Hi, Good to see that new products are being offered on this site! What are the balancers worth for a VLT? Or are the prices for the above balancers for all engines? John

Hey John The VLT is $310 plsu $10 Delivery We have 5 coming in this week, as they are an ORDER ONLY basis Thanks RACEPEC SALES TEAM

have you got a picture of one of these romac balancers for the vl

I'm taking delivery of some this week, they are a NEW PRODUCT Thanks RACESPEC SALES TEAM

DO you have any pictures of your work youve done to VL's? Thats what sells this stuff!

We dont work on VLs, but we can supply the parts for them Thanks RACESPEC SALES TEAM

have u received the balancer yet from romac? if so could you please put a pic of it up