We have had the new version of the flat finished scuff plates to suit the VL Commodore for a few weeks now, and it is by far the best design we have come up with. After searching through countless numbers of VLs to find a perfect set to mimick, we finally found a NOS set at Smiths of Port Adelaide, thanks Pete and went about designing them. Most of the ones, we came across, were either warped, cracked, or parts missing from them. I can not take much of the credit for these, as my brother in law, designed and drew them up for us on INVENTOR (in his available spare time). We have incorporated several features into the scuff plate, but also, did not want to go over the top with different styles and themes. The major hurdle we had, was the angle of the section along the sill panel, this gave us the biggest headache, as we wanted them to since nice and flush, yet prominent aswell. We went through 5 - 6 prototypes, before this one was ticked off. We had originally decided to put the protruded lines into the design, but after making the sample, over 85% of people who saw the sample, were not happy with it, so we decided to make the plain version. This would allow you to either POLISH, ANODIZE or ENGRAVE them. Each kit consists of 4 scuff plates - 2 x FRONT and 2 x REAR Each has been milled to fit nice and perfectly each and every time. We have also incorporated a small secutiry feature into the design, where by the hard plastic door surround, fits into the scuff plate, making it much harder for passers by to steal. Furthermore, you can also use the factory metal clips to hold them down, or sikaflex, but not really necessary. RRP $249 per set If we can get a PRE BUY happening for 25 sets. Waiting time at the moment is about 4-5 weeks. $199 set A Deposit of $75 is required to confirm place. I will have some further pics installed on the car tomorrow. PRE BUY LIST 1. FIL30T **PAID** 2. OOH30T **PAID** 3. Psi_Wagon **PAID: Full Amount:** 4. kalais6 **PAID** 5. RAW355 **PAID: Full Amount:** 6. RAW355 **PAID: Full Amount:** 7. Yeti **PAID: Full Amount:** 8. 9. 10. If you would like to go ahead and be on the PREBUY, please PM or [email removed], with your Full Name and Address Details. Payments can be made via Direct Debit Bank: NAB Name: RACESPEC BSB: 085443 ACC: 573711432 or Credit Card (this incurs a 1.5% Fee) Please PM us your email address and we will forward the CREDIT CARD AUTHORITY FORM for you to fill out and email back to us. Thanks Tarek RACESPEC Some original photos have not been recovered yet.

what type of metal have you used and how thick is it?

We have used T6 Grade Aluminium and it is 2mm thick all round FRONT REAR This is our test vehicle, we make all our parts on Thanks Tarek RACESPEC Some original photos have not been recovered yet.

you can put me down for a set, ill pm you once if made the $75 deposit.

calais25t will take a set if you can polish em right up.

Psi Wagon I will add you to the list Morgz, we can get them polished, but that is an extra cost. I'll find out how much Thanks Tarek RACESPEC

Put me down for a set for the Pre Buy ones, I'll arrange deposit tonight.

kalais6 you are on the list Thanks Tarek RACESPEC

2 payments have been received, get your orders in Thanks Tarek RACESPEC

Whats the price for a polished set and also a price for a normal set. How soon can you send them. (Dont want group buy)

At the moment, wait is 4-5 weeks, RRP$249 Polishing is another $50 Thanks Tarek RACESPEC

i know on the first design that you were incorporating designs like the holden emblim or calais emblim ect. is this still available??

with the original design, we were incorporating the lines, that were in the factory items. Most people did not like them, so we opted for the flat finish, were people can get them engraved with patterns of their choice or emblems, as per their requirements Thanks Tarek RACESPEC

i said i wanted 2 make some of these about a month ago! and now i see this thread. are they always goin 2 be avalible? or just the 200 now?

these will be available for $249RRP this group buy is $199 Thanks Tarek RACESPEC

i actually made some myself, well started to, made one prototype set. it doesnt have the curve on the underside to grip onto the car as i didnt have the right equipment to do it. but these look awesome, just like the oroiginal ones, just metal! i can appreciate the time it takes to make these, i gave up with mine haha

i just noticed some ppl have paid deposit already do we all pay deposit now or when list is full? these will come up a treat

its up to you, people have paid a deposit to secure their names 100%, you can do so if required Thanks Tarek RACESPEC

let me know when its all happening as the other thread went for months and ill put it straight in tarek but im still 100% for sure cant wait(but ill have to hey lol )

Anyone else wanting a set of these? We have 7 people so far, and 2 have paid deposits Thanks Tarek RACESPEC