Lol, yeah I pulled the interior of the door off and I couldnt see a way to get to the handles... Reckon you could type up a little guide so I could do them?
Some original photos have not been recovered yet.
the out side handels are pretty easy should take you about an 1 hour tops....
Remover your door trim, remove your theif sheild (if you have one) and with a 10mm socket and bit of an extention undo and replace?
pretty easy
yup thats right for the front ones
^
then on the back to get to one of the nuts the every back one u have to un do the screws on the side of the door holding the locking bit in then push it over to get to the screw
Quote:
Originally Posted by PLY-BOI
yup thats right for the front ones
^
then on the back to get to one of the nuts the every back one u have to un do the screws on the side of the door holding the locking bit in then push it over to get to the screw
Spot on. Just try not to drop the nuts in the door, some can take a while to find.
Some original photos have not been recovered yet.