Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.
Can anyone help? I have been told that I may have a vaccum leak as the control for the direction of air flow (windscreen defrost,feet, face etc), doesn't seem to be working. Only works on feet. Where do I look for leak? I also have bad exhaust fumes coming inside, where do I look for this?
Shaz
Some original photos have not been recovered yet.
0 likes
IM not 100% sure but i think they go to a round black plastic ball ususally underneath the front guard somewere
i might be wrong
0 likes
the whole dash has been in and out of the ss a few times try pm'ing cruptd hes the owner who orig painted it.
0 likes
chech out the technical articles, there is some info about the vacum lines
0 likes
Quote:
Originally Posted by 427vlc
IM not 100% sure but i think they go to a round black plastic ball ususally underneath the front guard somewere
i might be wrong
Thnx for that, found black plstic ball ,but hoses look fine. Can ya take ball off and see if it's that? How does it work?
0 likes
Quote:
Originally Posted by NASTY1
the whole dash has been in and out of the ss a few times try pm'ing cruptd hes the owner who orig painted it.
Shaz here, you got wrong car, my car white vn commodore, I'm using clicks site.
0 likes
the ball is storage for vacuum so when the engine shuts off you can still use the controls until the amount in the ball is depleted to check this just spray the ball with nifty or something like that and blow into the hose and see if it bubbles up but it's more likely that the vac hoses on the back of the rotating switch itself have come off
0 likes
the vaccume ball is for use when you have wide open throttle or when the motor has no vaccume so it dosnt go to foot or screen (cant rembember).
the inline one way valve usuley buggers up there like 50c for anywhere so give that a try, and also they only work one way so try swaping it arround again......
0 likes
