Master Power T61 - $890 T3 flange - requires external wastegate - Full 360 degree thrust bearing. http://www.spoolimports.com/content/Pistons.asp any1 got more info / are they good for rb30's or ??

hey man there is a post about the masterpower turbos if you do a search, i have brought about 15 in from the usa and never had a drama with them as far as performance go,s i sold my mate one 2 and a half years ago still going strong, with a 3" zorst slightly bigger injectors wolf 3d ver 4, atnd that turbo with a man gearbox. runs 11.2 sec 1/4 mile all day long..... hope that helps cheers

How much for the one you sold to your mate?? they laggy at all?? can you beat $890 ?? or should i just get one off spool imports?? seems like a bargain , when hi flows go for around 1200+ ... ?!

Quote: Originally Posted by Dark_Vl Master Power T61 - $890 T3 flange - requires external wastegate - Full 360 degree thrust bearing. http://www.spoolimports.com/content/Pistons.asp any1 got more info / are they good for rb30's or ?? Is that in AUS currency?

I assume so?? its one of this sites sponsors ?? i assumed it'd be aussie...

I have one on my VL. It was missing an oil seal, and as soon as the oil got hot it blew smoke, got it fixed ( Was about $200 ) and have not had any more problems with it. My VL is Auto, and currently makes 320rwhp at 15psi.

master power turbos are (from all reports) machined down to smaller sizes from a large T04 style wheel, front and back. so each one is not specifically sized and designed individually with regards to fin pitch, rake etc, they are just whacked in a lathe and ground down to fit in smaller housings than the large blank they came from. so essentially they are cheap because they use an old style blade design. the yanks swear by them, and as you can see from other people here also ^^^ they appear to do the job quite well for the price.

great thanks for the info, this could do the job perfectly for a cheap replacement hi flow turbo that im looking for... only downside i can see with the one above is it seems to require an external wastegate...which would go over my 1k limit... do master power make one with an internal one?

Dark vl i used to bring them in a year or so ago, my mates imported from usa to my door was about $550aud so there not makeing heaps ot of it .... but i dont get them any more as the cheepo ebay, just that sells for 200 bucks kinda stoped people buying reasonable ones.... if you are after more info, do a search in google with materpower/toyota sourer they use them flat out in the usa with fairly good results all the best mate

Quote: Originally Posted by Dark_Vl great thanks for the info, this could do the job perfectly for a cheap replacement hi flow turbo that im looking for... only downside i can see with the one above is it seems to require an external wastegate...which would go over my 1k limit... do master power make one with an internal one? I only recently sold an external wastegate on ebay for about $50. Advertised it on here and no one was interested!

Quote: Originally Posted by RB26DETT I have one on my VL. It was missing an oil seal, and as soon as the oil got hot it blew smoke, got it fixed ( Was about $200 ) and have not had any more problems with it. My VL is Auto, and currently makes 320rwhp at 15psi. i think sum1 else had the same problem as u didnt they ? anyidea if masterpower got their s**t straight and made sure all their products had oil seals? ta

Sorry mate, Im not sure.