Hey Guys. I am looking at putting a roll cage into my VLCT, and Im after some places people reccomend I take it to. I need a 6 point andra approved cage, that is obviously going to be of high quality both strength and looks as it will be a show car. Also, Im fitting a later model dash into it, would I be better off putting the dash in before getting the cage? Or get the cage put in and fit the dash in around it? Finally, whats everyones opinion with colour of the cage? Should I go the same colour as the car (unsure exactly yet), interior (butter tan leather and black), or just black and highlight it with the tan wrapped around the padding? Thanks Guys! Sean

why 6 point? how fast do you intend running? do the dash first , as you will probably need to cut and weld mounts etc here and there. paint it matt black , and maybe wrap the foam with the leather.

nah do dash last and fit it around the cage. also to put it in properly u need to remove your entire interior first .

Just done this in a mates car....... Dummy fit the dash first so you no it will fit..... Then remove all the interior and get your cage done...... Dont no if you need to go 6 point...... If you go 4 point with a side intrusion bar then there will be no need to run any part of the cage through your new dash...... But yeah if your set on going 6 point dummy fit the dash then pull it all out and get your cage done...... good luck......

Well im am looking (well more so hoping) at 10's... No faster as it will be manual. Will I need a 6 point for these times? Or is it based on MPH? So dash before or after?

id make the cage as hidden as possible.... good luck with your quest to run a ten with a manual, no easy task that one...

yes i realise that, which is something im aiming for! much like alot of other things with this car...

dont need a 6point for tens

righto... 4 point it is... ill give these guys a call in the next week or two and book it in...

agh but u need more than a 4 point aswell Some original photos have not been recovered yet.

you mean besides a cage? I realise that.

no i mean u need more than a 4 point but less than a 6 point cage

Quote: Originally Posted by OVL087 no i mean u need more than a 4 point but less than a 6 point cage stop speaking in riddles you wanker........ you need a 4 point + side intrusion bar

making it a 5 point Some original photos have not been recovered yet.

Quote: Originally Posted by OVL087 making it a 5 point F uck andy you really no how to confuse the bloke dont you....... Mate a 4 point cage is all you need then get them to add a side intrusion bar which will be removable so when your driving round the streets you dont need have to hope over this side intrusion bar simple....... Tell me andy why did it take you five posts to try and spit that out and in the end it to col to say it you w anker...... You some kinda post w hore or something hahaha Some original photos have not been recovered yet.

my cage is 4 point with side intrusion, make sure who ever does it is using seamless pipe, as that is what is required, and some places (like who made mine) don't uses seamless pipe, which in effect makes my cage illegal under andra camms etc! have some pics if u are interested or want some ideas

busta boy i just like to keep the thread alive.

Haha... My brain hurts. I also know about the side intrusion bar. How does it get welded in on the other side? Somewhere near the dash or something??? Any pics of this 4 point set-up would be good for me to get an idea.

it bolts to the floor , pretty close to the front edge of the kick panel trim. maxpsi might have some good pics of how his bolts down there

BUMP... Anyone got pictures at all?