Hi guys Just wondering if anyone had any experiance with Electrical kits. I have ordered the Digital Fuel Adjuster and Hand Controller just wonding if anyone has used one of these? And how u go bout tuneing them for my RB30ET. Heres the write up for it in the catalogue . Modify air/ fuel ratios . allow air-flow meter or injector swaps . change closed-loop running characteristics . overcome boost cuts This unit is a huge revolution in DIY automotive performance. It give you the power to compleatly tune the air/fuel ratio throughout the entire load range, at 128 load points, providing incredible mapping resolution and brilliant drivability. It uses the Hand Held digital controller so there is no need for a lap top and supports both static and real-time mapping. It can be used on 0-5v and 0-12v signals, so it is compatible with all voltage output air flow meters and MAP sensers. It can also be set to work with 0-1v signals allowing modification of EGO senser signals. Any info would be grate cheers Luke

allows injectors swaps? wow mate, get it working and i think you find ALOT of people will want one.

Ill keep everyone posted on how it goes i get the kit on wednesday will try to upload some pics then.. It sounds pritty good

how much it cost?

bout $200 for kit but u need to build it from a kit.

The Jaycar kits are always very good - if people are keen on them, i can buy them thru their wholesale side and save a fair bit.

I also can. Depending on how this kit goes on my car If any one is instrusted. I could make them up. Have all tools and electrical know how.

Rusty - Gimme the jaycar part no : i can't find it in the Electus catalouge

Kc-5385 anyone know how i would go bout tuneing it once i have it installed

BBUUUUUUMMMMPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! any more info on this topic??? As im interested???

Quote: Originally Posted by DJ Mitzi BBUUUUUUMMMMPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! any more info on this topic??? As im interested??? Will Have all info on wednesday afternoon. Will let u know how it works then and up load some pics... cheers mate

kewwwlll Cant wait... this must be the cheapest sort of ecu managment thingy.. Some original photos have not been recovered yet.

$130 ~ i think per unit Luke.

yeh thats bout what i got mine for $138.99 with hand controller

STOCK-CODE: KC5385 Digital Fuel Adjuster Ref: Performance Electronics for Cars – Silicon Chip Publications. This unit is a huge revolution in DIY automotive performance. It gives you the power to completely tune the air/fuel ratio throughout the entire load range, at 128 load points, providing incredible mapping resolution and brilliant drivability. It uses the Handheld Digital Controller – KC5386, so there is no need for a laptop, and it supports both static and real-time mapping. It can be used on 0-5V and 0-12V signals, so it is compatible with all voltage output airflow meters and MAP sensors. It can also be set to work with 0-1V signals, allowing modification of EGO sensor signals. This unit has been extensively tested on a wide range of cars including Subaru Impreza WRX and STi, Nissan 200SX, BMW 735i, Lexus LS400, and Nissan Maxima. Kit supplied with PCB, machined case, and all electronic components. Kit requires the Handheld Digital Controller – KC5386.

Sounds pritty good doesnt it. Cant wait 4 the weekend to get one hooked up. Hey XTC16 do u know Tim Griffo from Brizzy i bought my VLT off him. I think he has a calais know?

You will also need to buy the exhaust gas analizer they sell, you can then set you mixture on the fly

Luke - I sure do know Tim - remember, i was telling u to buy this car Some original photos have not been recovered yet.

Quote: Originally Posted by JET-6 You will also need to buy the exhaust gas analizer they sell, you can then set you mixture on the fly what does tuning on the fly mean? i know what u mean bout the 02 metre Quote: Originally Posted by XTC16 Luke - I sure do know Tim - remember, i was telling u to buy this car lol sorry mate ... does tim come on here much ? Do u know if tim had a cooler on my car. Also do u know if he ever new what was making the knock in steering at full lock? sorry bit off topic Quote: Originally Posted by XTC16 Luke - I sure do know Tim - remember, i was telling u to buy this car lol sorry mate ... does tim come on here much ? Do u know if tim had a cooler on my car. Also do u know if he ever new what was making the knock in steering at full lock? sorry bit off topic JET-6 what should the metre read?? Some original photos have not been recovered yet.

Quote: Originally Posted by rusty577 what does tuning on the fly mean? As your driving along