Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.
hey guys,
when i turn up the volume or bass on my cd player past a certain point it turns off then turns back on again as if the volume or bass is too loud? dunno. it just started happening. was working perfect up until a couple of days ago. any help appreciated. cheers
0 likes
Sounds like you have a short across one of your speaker wires running off your HU, check all you speaker connections for damage
0 likes
Quote:
Originally Posted by Stooge
hey guys,
when i turn up the volume or bass on my cd player past a certain point it turns off then turns back on again as if the volume or bass is too loud? dunno. it just started happening. was working perfect up until a couple of days ago. any help appreciated. cheers
How large is your power wire running from the Head Unit to the battery? If it's the standard one, maybe consider getting a slightly thicker one, (that's if it drops out when say the subs kick in).
Getting a thicker wire to allow more current through usually works if you got a large setup. (Just make sure you build a fuse in there somewhere, so she doesn't surge on you)
What setup are you running?
But other than that, check the speaker wiring also. (as already mentioned)
0 likes
Yeah mine has just started doing this to. I have 6" splits in the front and the little tweeter on the passenger side is starting to make a gay rattling sound. Only started doing it the other day (Because I put new door trims in, so I have to re-solder the wires to speakers). What could this be? Sh*t soldering lol
The head deck is also cutting out, just the face. The music continues to play but the face goes blank for a few seconds then comes back to life.
Jason.
0 likes
Quote:
Originally Posted by aquabat
Yeah mine has just started doing this to. I have 6" splits in the front and the little tweeter on the passenger side is starting to make a gay rattling sound. Only started doing it the other day (Because I put new door trims in, so I have to re-solder the wires to speakers). What could this be? Sh*t soldering lol
The head deck is also cutting out, just the face. The music continues to play but the face goes blank for a few seconds then comes back to life.
Jason.
What head unit is it? When does it go out? Just when the bassy parts pump or? Could just be a HU problem, but if it's only with Volume, I reckon it has to be a power problem.
Tweeter making a rattling sound? Not blown?
0 likes
might sound stupid but this was happening to a mate's car, check your battery terminals coz if the voltage goin to the unit drops too much then it will cut out for a second or two.
just check the terminals are tight and no corrosion and good solid wire connection.
0 likes
is the car on or off wen u are attemping to turn the system right up??
0 likes
Quote:
Originally Posted by GaLMAD
might sound stupid but this was happening to a mate's car, check your battery terminals coz if the voltage goin to the unit drops too much then it will cut out for a second or two.
just check the terminals are tight and no corrosion and good solid wire connection.
Smart thinking, Galmad
0 likes
i got a pretty basic setup. two 6 inch at the front 2 6x9 at the back with no sub. the car is on while trying to turn it up.
0 likes
24-07-06, 15:27 GMT+10#10 i had a very similar problem, the face lights would dim when bass came through, turn it up and it just turned off.
i ran new wires for power and earth straight to the battery.
fixed it, never had a problem with it since.
i dont think the original earth is quite strong enough.
0 likes
24-07-06, 15:51 GMT+10#11 hmm if its not strong enough why would it start happening after 4 months?
0 likes
24-07-06, 16:22 GMT+10#12 This Happened in my VL and I only just fixed it on the week end. VL wiring is ****, plain and simple. Although I run a rather large stereo, this is what I did to fix it.
I ran a new earth from the battery to the body made out of 4 guage stereo wire. I left the factory earth from the block to the Battery but also added another 4 gauge stereo wire from the Block to the battery. ( You can never ahve to many earths in a VL.)
I also used a Splitter block (Gold car audio one) and ran a 2 guage power wire from the positive to the splitter and ran all positives off of this.
I also ran another NEW 8 guage wire from the Alternator to the Battery Terminal.
I should also Add the fact that I use Gold Fitting through out and gold battery terminals.
This fixed my problem.
Or Your HU could just be stuffed.
I also ran a new 16guage wire from the battery straight to the HU. and fused it at the front near the battery.
As in a VL there is a Long path through small wires to get form the battery to HU.
Then wired the Factory Permanant power wire to my turbo timer, so it to runs off a fuse...
Good Luck
0 likes
24-07-06, 17:23 GMT+10#13 check the earth wire on ur antena. i know it sounds stupid but your headunit actually earths to your antena aswell.
the earth for the antena is under ur passenger side guard. u will have to take off your mud gaurds under the wheel arch. follow the antenna up and you will notice that ther is a black wire coming from it this should be earther to the chassy on a spade clip on the inner side of the wheel arch.
good luck
0 likes
24-07-06, 17:52 GMT+10#14 Quote:
Originally Posted by Stooge
hmm if its not strong enough why would it start happening after 4 months?
not sure but mine started happening about 2 or 3 months after i installed it.
maybe it deteriorates
0 likes
24-07-06, 18:06 GMT+10#15 truu. thanx alot for ur input guys. appreciate it cheers
0 likes
24-07-06, 18:07 GMT+10#16 well read the manule and see if it is a function of the deck mine has that function it is called pwr saving mode
0 likes
24-07-06, 18:40 GMT+10#17 yeh read the manual. didnt find anything on a power saving function. ill look for shorts and check wiring
0 likes
09-08-06, 13:36 GMT+10#18 check the speakers they may short as mine did the same
0 likes
10-08-06, 08:56 GMT+10#19 Sounds like a JVC headunit?
Just put a slightly bigger power and earth wire to the headunit and go from there...
0 likes
17-08-06, 13:09 GMT+10#20 The reason this starts to happen after a period of time can be due to oxidisation of the standard inaddiquate earth... upgrade the earth and powerleads (make suer both are the same ga if not use a slightly bigger earth than power and it should be all good.
0 likes