T3/4 hi-flow To4 .06 comp cover To4 H -trim 58mm front wheel I am guessing sierra cosworth exhaust wheel Modified Vlt exhaust housing with the original dump pipe with wastegate in the dump, cut and faced, so the dump pipe is separate. Has a small dump pipe. Has made 270rwkw on a Rb25 and has trapped 120mph in a manual R33 on pump fuel at 20psi Good condition $800 cheers darren

sounds like the hiflow darren used to have ? if so this is a good turbo and at a very good price .

Is this the same as your old one Darren and if so how was it, when did it come on boost, did it run out of puff up top etc? If its going to suit my requirements I shall buy it.

Has a slightly smaller exhaust housing, and a rear turbine wheel that flows pretty much the same(both 270rwkw), but is lighter and more effienct, so should spool quicker. cheers darren

What RPM do you reckon there would there be usable boost on RB30ET? Does it come with actuator, not that it really matters as I could use my old one

Comes with actuator, can't really give you boost response, but it woudn't be much laggier than standard really. Useable boost would be mid to high 2's, or really about the same as standard, as for running out up top, darrens and this one have the biggest comp wheel, comp cover you can get on a hi-flow, so if if you want more than that you want a Gt30/3540 as these hi-flows are really up there with the biggest flow wise for a hi-flow. Really would go low 12's easy as, and at best mid 11's with a perfect setup, converter, diff gears and associated engine supporting mods. cheers darren

PM me your number and I'll call you, I dislike making biggish purchases by type.

Quote: Originally Posted by Alsynon PM me your number and I'll call you, I dislike making biggish purchases by type. Don't blame you..you have p.m, but you find most people know me on here and would vouch for me Wyndup vl nitron tubbed 1 Bt PSI Mr vlt cheers darren

Can vouch for him, although yep, he is a clown....haha. Turbo sounds identical to the one that tubbed1 had built by ATS a while back, its now on SLVRBULLETs car and makes strong power on small boost. Mine was the same as JETR31 said although ex hsng was slightly different and I went 12.0@115mph with it with other supporting mods. Very good turbo for the street before you cave and go to a GT series as ive done....

^^^ now i got it.lol.

Quote: Originally Posted by Wyndup Turbo sounds identical to the one that tubbed1 had built by ATS a while back, its now on SLVRBULLETs car and makes strong power on small boost. Mine was the same as JETR31 said although ex hsng was slightly different and I went 12.0@115mph with it with other supporting mods. Very good turbo for the street before you cave and go to a GT series as ive done.... For what I have planned for it it should be sitting smack bang on or very close to the middle of it's max compressor efficiency, pumping out 36.5lbs/min. Darren as I said in our earlier brief conversation, I will call you tmw (might as well let the boss foot the bill). It's a case of it's easier to get the details on exactly what I am purchasing thing than a trust thing. Jim

#sold#, wyndup get of the net and do some work cheers darren Some original photos have not been recovered yet.