Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home›VL Commodore
VL Commodore

my red vl turbo

Started by MaZzA vbmenu_register("postmenu_968026", true); · 7 May 2006 · 69 replies

Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts.

hey all, ive been using these forums for a bit now so i thought i would put my car up my names mat, i drive a red genuine 1986 sl turbo (sl with p/s, a/c and tacho/volts/oil/digital clock dash) it has a Group a front end and side skirts (i also have a le rear apron to go on wen it get resprayed) the motor is stock (accept for the k&n panel filter and cai) and was rebuilt 6000kms ago using acl internals, the turbo was also rebuilt at the same time and im currently running 7psi my tranny is auto with a 2500stall and a stage1 shift kit with a vs v8 tranny cooler and the diff is a 3.45 lsd the car rides on 18inch vt series2 gts rims and lowered by pedders super low springs and kyb shocks up front and pedders shocks on the rear with a pedders adjustable panard aswell brakes are vt twin piston calipers, slotted rotors and braided lines up front and stock vlt on the rear the interior has grey bucket seats, black super plush carpet and machined aluminium window winders and handbrake to match the interior also consists of boss steering wheel, boost guage, 5" monster tacho, temp guage, turbo timer, extinguisher, high- rise console and a re-trimmed rear seat. ive also added grey calais pillar trims and sunvisors the stereo consists of cd player, two 6x9 3ways on the custom parcel shelf, amp, and two 12inch kenwood subs in the custom boot setup i keep u all updated on my car
Photo 1 shared by MaZzA
vbmenu_register("postmenu_968026", true);
0 likes
pics rear brakes/ lowered suspension detailed with all new studs front brakes interior
Photo 1 shared by MaZzA
vbmenu_register("postmenu_969550", true);Photo 2 shared by MaZzA
vbmenu_register("postmenu_969550", true);Photo 3 shared by MaZzA
vbmenu_register("postmenu_969550", true);Photo 4 shared by MaZzA
vbmenu_register("postmenu_969550", true);Photo 5 shared by MaZzA
vbmenu_register("postmenu_969550", true);Photo 6 shared by MaZzA
vbmenu_register("postmenu_969550", true);
0 likes
the car is currently at the exhaust place getting a full three inch stainless and a custom dump off the turbo will get some pics up once i get the car back
0 likes
i have a few parts waiting to go on: *Malpassi rising rate reg and guage *Oil catch can *Turbosmart boost controller future plans: fit the parts above fit my cooler (its now on order ) new taillights and centre garnish 3.7 diff gears remove aireal and passenger door lock mould and fit kit respray same colour Some original photos have not been recovered yet.
0 likes
looking good Mat,keep the progress pics/info coming
0 likes
awesome matt, still gotta have a look at it in the flesh brian Some original photos have not been recovered yet.
0 likes
cheers fellas yeah ive done a bit since ive had it now that the expensive part is done (the exhaust) it should all start falling into place, fingers crossed yeah brian, im gunna organise a cruise soon, so u will see it then Some original photos have not been recovered yet.
0 likes
Looks the goods man! Keep up the work and keep us posted! Some original photos have not been recovered yet.
0 likes
Looks the goods man keep us posted
0 likes
my exhaust
Photo 1 shared by MaZzA
vbmenu_register("postmenu_977086", true);Photo 2 shared by MaZzA
vbmenu_register("postmenu_977086", true);
0 likes
looks sick mat good work
0 likes
Great looking VL Mat! I love your front seats! What brand/model are they? Thats just what my calais needs too.
0 likes
cheers mate yeah they are soo comfy, hold you in nice and tight wen ya giving it a bit around corners they are obx monaco in grey, fully reclinable mat Some original photos have not been recovered yet.
0 likes
MaZzAArchived member
thanks mate car is booked in on monday to have the fuel pressure and boost raised on the dyno will let yous know how i go
0 likes
MaZzAArchived member
car made 218rwhp on 12psi im pretty happy with it car is soooo much more fun to drive skates a bit now
0 likes
HoldenOnArchived member
218rwhp isn't too bad at all Mat. Good work.
0 likes
MaZzAArchived member
new gearbox is on its way 3g stall not sure on wat shift kit yet while its getting that done im gunna get new gearbox mounts replace the uni spool and 3.9s also have a apexi safc2 to go in first post updated
0 likes
HoldenOnArchived member
3.9's hey Matt. I remember telling you many months ago not to bother with 3.7's and to go straight to 3.9's ......nice to see the 3.9's will be in place soon. Good work mate Some original photos have not been recovered yet.
0 likes
MaZzAArchived member
yeah i know haha i have 3.7s here but i cant get anyone to fit them so hopefully get my 3.9s back
0 likes
MaZzAArchived member
new box is in went with a keas stage 2 shiftkit in the end thanks to the guys at top quality trans for sorting it all out last box was cactus, took the pan off and metal shavings were everywhere just got one of them custom fuse rails put in aswell replaced the melted one car is goin in this friday to have the apexi safc2 fitted and tuned so heopfully it becomes more drivable and i dont go thru plugs as quick as i am at the moment first post updated
0 likes
Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.

Who’s online

0 members and 0 guests active in the last 15 minutes

No signed-in members active right now. Guests are welcome to browse.

Visitors Today0

33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo.
As at . Recovery is continuing.