as topic says.... wat turbo is this dump pipe off? its custom but i wanna know what it will bolt up to i thought it was a t3 at first, but apparently it isnt...... thanks Some original photos have not been recovered yet.

man ive got one exatly the same, it was off a T3/T4 on a VL, if that aint enuff info let me know and i will find the guys email address and pass it on to ya for exact specs

looks like standard t3 or the t04e wich are the same anyway

T3's have more bolts. thats like a t28 or something.

that is a T25/T28 rear flange just had a look at a T28 flange exactly the same mate. which end you talking about???? the 3 bolt exhaust flange or rear turbo flange? cause the 3 bolt 1 is just a exhaust joiner theres heaps of different types of them around.

I thought VL T3s were the only stupid factory turbo that have an integral wastegate in the dump itself? Or did other factory turbos come with this setup? My guess is thats off a VL T3 and they just havent used all the bolt holes for simplicity...5 bolts would be enough anyway to get good clamping force... Theyve done a very good job compared to some ive seen.....

thats off a a t3/t4 its the same as the one i've got i got both turbo and wastegate from the states i think they are slightly different to a t28 flange and wont fit standard vl turbo. i think they were selling similar turbo's on ebay recently

im talking about the 5bolt flange bit (ignore the 3bolt flange, thats just a exhaust flange as mentioned b4) has anyone got a pic of a t28 flange? i want this to fit my t3 but i thought they have 6 bolts.....

Quote: Originally Posted by Wyndup Theyve done a very good job compared to some ive seen..... thanks mate, hopefully it fits

just searched ebay t3/4 exhaust flange: http://cgi.ebay.com/ebaymotors/OBX-H...spagenameZWD2V (http://cgi.ebay.com/ebaymotors/OBX-HYBRID-TURBO-DOWNPIPE-EXHAUST-WELD-FLANGE-T3-T3-T4_W0QQcmdZViewItemQQcategoryZ33742QQitemZ8062353634QQrdZ1QQsspagenameZWD2V) t28/25 exhaust flange (seen on the top row, 3rd from the left): http://cgi.ebay.com/ebaymotors/Nissa...spagenameZWD2V (http://cgi.ebay.com/ebaymotors/Nissan-T25-T28-Turbo-Flange-CA18DET-KA24DE-T-RB26DE_W0QQcmdZViewItemQQcategoryZ33630QQitemZ8062287553QQrdZ1QQsspagenameZWD2V) from this it looks like mine will fit my t3 Some original photos have not been recovered yet.

This is a stock t3 cutaway

ALL THIS SAID WAS T3 FORD STYLE 5 BOLT T28/25 DOWN PIPE FLANGE WWW.CHEAPTURBOS.COM (http://WWW.CHEAPTURBOS.COM) IS WHERE I GOT THIS INFO. Some original photos have not been recovered yet.

went back to the exhaust shop looks like this dump ive got itsnt going to fit one of the bolts is just out Some original photos have not been recovered yet.

Just use 4, with a gasket it should still seal fine.

Quote: Originally Posted by Wyndup Just use 4, with a gasket it should still seal fine. will that be ok? is there a gasket for it? risk of exhaust leak tho aye

i have no idea if theres a gasket for it?...and yes i'd be thinking if you had a bolt in each corner and the flange itself is the same shape as the back of the turbo then it'll seal just fine. Which bolt hole dont line up?

i think the one furthest on the right of the pic near the wastegate thingo

If the bolt holes don't line up, I assume the wastegate flap won't line up either.

Quote: Originally Posted by jordy If the bolt holes don't line up, I assume the wastegate flap won't line up either. trew, i never thought of that

does any one know wat it is off? i want to advertise it for sale but i dont know wat it is off