hi guys i have bought a r33 alternator to bolt on to my vl and the plug from my vl will plug in to the r33 alt but vl has a red wire that bolt on the back were do i put on the r33 plz help asap thanks

there should be a terminal

2 different types of vl alternators thats why! s1 and s2 were different. why would you get a r33 alt? lol

Because they bolt straight on and are higher output. 90A from memory. The power terminal is 8mm diameter and it is obviously insulated from the alternator body. It is right beside the 2 pin plug and has an adapter which points the terminal at 90deg. This is where the red wire will go. I added another wire the same diameter as the factory one and put it in parallel. No point having a higher output alternator if the cable between it the battery is too small!