Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home›Technical help
Technical help

gas compliance

Started by vltrb-0 · 8 Aug 2005 · 52 replies

Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts.

vltrb-0Archived member
looked for ages no one speaks of it except for paul and i dunno how keen he is to tell us who complianced it before him or if he knows if anyone knows of someone who compliances vlt's it would be much a ppreciated thanks did a search read **** loads very interesting but not what i was looking for
0 likes
alotofpsiArchived member
http://www.calaisturbo.com.au/showth...&highlight=gas (http://www.calaisturbo.com.au/showthread.php?t=48067&highlight=gas) Gas research to answer the other part of your question.
0 likes
vltrb-0Archived member
lol yeh i started that thread and wellsy didn't seem like he could be stuffed pm'ing me on the compliance issue is every **** just driving around uncomplianced? im gonna give gas research a call tomorrow but feel like a **** how many ****ers do u think they get called by asking bout gas conversions for their car, im just going to gas cause its so much more logical for power and fuel consumption but they prolly just think im a cheap **** lol
0 likes
alotofpsiArchived member
Of cause most of the old cars are uncomplianced. Only the cars after 92 need a plate. Unless you sell it then it gets complicating. Im very eager to see wellsys vl. I heard it puts out 320rwkw (only heard not trying to start anything)
0 likes
WeLLsYArchived member
You got the numbers mixed up... It made 023 kw... My car will be tuned to a nice and safe, 250 ish kw @ wheels. Until I work out what Im going to do about my bottom end, and gearbox. Some original photos have not been recovered yet.
0 likes
vltrb-0Archived member
23kws wellsy **** no wonder everyone is scared of what ur gonna bring to the street lol
0 likes
GAS747Archived member
Quote: Originally Posted by WeLLsY You got the numbers mixed up... It made 023 kw... My car will be tuned to a nice and safe, 250 ish kw @ wheels. Until I work out what Im going to do about my bottom end, and gearbox. dont lie! U told me it made 320 RWKW... Altough I dont understand if you have a gas car why you want a Race tune and a street tune. that just ruins the reason why you would go gas. Just give it a streetible race tune and stick with it. Some original photos have not been recovered yet.
0 likes
vltrb-0Archived member
Quote: Originally Posted by VLMuzza dont lie! U told me it made 320 RWKW... Altough I dont understand if you have a gas car why you want a Race tune and a street tune. that just ruins the reason why you would go gas. Just give it a streetible race tune and stick with it. i cant see a stocko bottom end handling 320 rwkw maybe for 3 seconds Some original photos have not been recovered yet.
0 likes
WeLLsYArchived member
Muzza we have already discussed this... Its not Street and Race tune... . Its called the "Gearbox needs to last more then a week tune" Once I sort out where Im going with the car, it will be one tune 24/7.
0 likes
david85dcArchived member
bottom end should be sweet ay??? lol gearbox should also be sweet if its a mx7 wellsy just dont slam the gears
0 likes
WooDArchived member
my car has been gas complianced but this was before i bought it and was done back in 99! wellsy, sell the gearbox and get an auto before you lose 2k+...
0 likes
david85dcArchived member
duz360's mate mad 350rwkw or something with mx7 wellsy u fool get it rebuilt with gtr parts, double synchros etc would never break then
0 likes
MorgzArchived member
Wellsy your doin the right thing, when the time comes fill her up on straight propane, and wind the boost up. maps can easily be made for both types of gas.. and when you switch it over (you might have two mixers by that stage ) it will work very nicely.. Gas compliancing is whats done when the gas installer installs the gear and approves it, and signs all the necassary paper work, and sends it off to vicroads.. and attaches a compliance plate to your car.. thats all.. Nothing to do with emissions, it's just to show it's been installed to recommended specifications. I was there when it was ran, and saw it.. dyno print out to prove it, rumours are nothing but.... rumours Some original photos have not been recovered yet.
0 likes
GAS747Archived member
why do you have to run propane?? that means you need a street and race tune! I wouldnt bother.. there is only a few places you can actually find propane!!! That just makes life harder..
0 likes
MorgzArchived member
Yeah it does.. we only have one spot up here, and thats BOC.. We were having trouble with pump gas octane levels varying up here, down in melbourne it might be different, but thats basically what sets the gas pressure, and running out of gas at high rpm and boost would be a problem, so propane is a good back up if matt wants to run boost without any fear of leaning it out. I know the gas lines have been enlarged, and the springs in the convertors changed.. but that will only get you so far, it's more of a safety precaution than anything else..
0 likes
GAS747Archived member
Fair enough.. Will be interesting to see how many km's he will get outta a tank of propane and to see where he can fill it up when he runs out Only 2 places in melb sell propane Also u would need to tune ur car differently for Propane aswell and its not like on a pertol car where u can put a different map into the computer.. just causes more hassles i think. but each to there own Some original photos have not been recovered yet.
0 likes
GAS747Archived member
Quote: Originally Posted by WeLLsY Muzza we have already discussed this... Its not Street and Race tune... . Its called the "Gearbox needs to last more then a week tune" Once I sort out where Im going with the car, it will be one tune 24/7. yeh well wot ever it is, you still told me it made 320 RWKW Like i said very very big power esspecially with LPG and no forgies... Some original photos have not been recovered yet.
0 likes
MorgzArchived member
yeah thats true, propane is not like normal LPG.. The plan would be, a softer low boost tune for street driving and cruising, and then go by a propane outlet for racing when he gets his bottom end and box sorted.. It is a bit of mucking around, but in the end it's the best of both worlds, and leaves a bit of room when he decides to chuck a bigger compressor on the turbo, it's more of a good base to work from with the fuel and ignition side of things done, he should be able to make more than enough power one day if he wants to get into some serious racing... all up to him I guess. I am keen to see how it all goes as much as the next person.. bit annoyed I sold it so cheap now :P haha
0 likes
WeLLsYArchived member
Muzza I dont understand why you care so much ? I could be talking s hit but at the end of the day who cares. I couldnt care less if I run a 10 or a 14, if I lose every drag I ever have... Im doing this to please myself not others..... Im not about making statements, Im not about beating others, Im about lighting up the tyres in 3rd cruising along at 70km/h... Im about burnouts, going fast. Cos thats what I enjoy doing.
0 likes
david85dcArchived member
thats the spirit wellsy
0 likes
Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.

Who’s online

0 members and 0 guests active in the last 15 minutes

No signed-in members active right now. Guests are welcome to browse.

Visitors Today15

33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo.
As at . Recovery is continuing.