CURRENT SPECIALS: 1 RB30 CUSTOM PLENUM POLISHED, NOT ENGRAVED, WITH EVERYTHING LISTED BELOW, TO SUIT XF OR 80MM THROTTLE BODY $800 DELIVERED
Are you after:a REAL decrease in lag ?a REAL increase in throttle response ? andthe highest flowing RB30 plenum using standard runners ?
If you answered YES to any of these questions and want the results to speak for themselves and nobody else ............ read on.
See below a dyno sheet of a RB30 with one of my plenums, 80mm throttle body, standard GT35/40, and a 1.06 exhaust housing and the results speak for themselves. Full boost, 25psi, reached by 3000rpm, this is SIMPLY UNHEARD OF.
RB30 Plenum price - $900 delivered (with exchange runners) or $900 + delivery (without exchange runners)
All plenums come complete with:
- bead blasted runners
- 5 seperate vacuum fittings for brake booster, fuel pressure regualtor, map sensor, boost guage etc etc more if you like on request
- throttle body plate to suit whatever throttle body you like (XF, Q45, LS1 etc included)
- studs, nuts and washers to fit throttle body of your choice
- logo engraved on all plenums
Extra's available are:
Polished plenum $120
XF Throttle Bodies with TPS $70 (bead blasted clean)
80mm Throttle body $400 (overall flow is up 20% on XF throttle body)
Fuel rail $120 (painted in 2 pac black)
**Discounts available for packages**
For those who want more specific info, on average, each port flows well over 200cfm @ 25" without any power porting what so ever.
All work is guaranteed and fixed free of charge and postage costs paid for.
Thanks,
Ariel
pm, email, msg or call
i can make it to fit any throttle body you like.
as for the long runner plenum, dyno results and driveability with a short runner plenum made me stick with this design.
Apart from the feeds on both ends of the fuel rail how is it twin feed? Is there a exit in the middle i can't see? Twin feed would mean a fuel feed from both ends and a exit in the middle to the reg like hks, sard fuel delivery rails. Awesome looking plenum btw.
twin feed, one on each end and a return in the middle. most prob cant see it because it is black, but rest assured it is there. only need a y piece to adapt to standard hoses and a few more hose clamps.
browny - sorry no fuel rail for rb20 in stock. if you send me yours i am sure i could do the same thing for you if you like.
Wyndup - results have show hp increases and substantial torque increases. with my old car up 35rwhp on same boost/dyno ad torque went from 1060 ft to 1300 ft of torque.
yes shanes is the old design, but they have got even better in performance since then.
Quote:
Originally Posted by DA HOON
get your car going Ariel as your rolling advertisement :p hehehe
these plenums are top notch! ;)
Steve
its coming.
new photos of plenum will be up in a week or so. No real changes to design, just better looking with less welds.
Also if anyone wants a chance to get $400 off one of these plenums, come to a Wollongong Dyno Comp. Look in the NSW section for details.
0 likes
This discussion is closed to new replies.
Who’s online
0 members and 0 guests active in the last 15 minutes
No signed-in members active right now. Guests are welcome to browse.
Visitors Today20
33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo. As at . Recovery is continuing.
