JD CUSTOM automotive 11 progress st mornington 5975 8688 [phone removed] proud sponsor of the VL TURBO NATIONALS full mechnical workshop latest diagnostic scanners dyno tuning 450kw dyno dynamics ls1, ls2, ba-fg ford, hp tuners/vcm suite, wolf, microtech,etc all repairs small or large and of course full fabriction shop, alloy welding anything made to order just opened exhaust shop side of bussiness can supply and fit any exhaust systems, mild steel, stainless, hi flow cats, mufflers, extractors, full custom made tig welded mandrel bent systems made to order jamie custom made plenums to suit- rb30, rb 20, rb25 specs- 6ltr volume fully TIG welded tuned length ram tubes accepts std air bypass valve (optional) MADE TO SUIT XF T/B, NOT INCLUDED $700+post with tig welds showing $800+post sanded down and polished as below polished piping kits includes all silicone hose, clamps etc $600 weld quality on 1.6mm alloy pipe $250 polished catch can to suit lh or rh side ba xr6 plenum fully cast alloy $1150 xr6 under car surge tank complete with 044 pump, fittings $895 vl under car surge tanks $795 with hoses,044 pump all fittings $300 bare tank $440 tank and 3 fittings and hoses no holes piping kits to suit plenums $650 with silicone hose clamps etc gen 3 i turboed 468rwkw @10psi Some original photos have not been recovered yet.

will you make ones for the RB25det ??

yeh i also make them for rb 20 and rb25 i'll post up pics of all, same price

pictures plz lad?

here are some pics.....;) Some original photos have not been recovered yet.

do these plenums fit without any modification apart from cooler pipes and throttle cable? such as all the standard idle control etc?

very easy to fit just drill out the thread in lower half of runners so allen key bolts can go up though hole into new plenum base, idle air valve can be fitted to the rear(optional), power steering resverior has to be moved down a bit, use a walkinshaw throtle cable as they use a xf t/b std, holden still has them $45, and i can tap 1/4bsp holes in the base to suit fuel reg, boost gauge etc, let us know how many holes u want.

some more in progress pics....;) Some original photos have not been recovered yet.

have made up the piping for them, polished alloy,will get pics up soon

Quote: Originally Posted by jdcustom have made up the piping for them, polished alloy,will get pics up soon hi jamie, do u have a price on the piping yet? thanks dan.

$600 polished piping hose clamps nd silicone hose, piping is to suit the hybrid type coolers getting round which can be brought for $220 on this site.

how bout if i was to get a plenum and the piping? still same price or can u do some sort of deal?

Or can you do piping for a standard plenum and hybrid cooler as all the other promised kits are full of crap.

im buying a hybrid tube and fin cooler havnt found piping yet but if i was to buy this kit would it fit straight on no worries? what sort of perforamnce would this gain and with cops how would it work? is it illegal to have this modifyed?

i will be pickin my car up today with the full kit installed...so i will take some pics and show u guys...;)

what hp will these plenums be good up to?

im very very interested where is JD customs loacated in melbourne?

im in mt martha ph. [phone removed] jamie not really into doing a piping kit for std plenum setup as there is allready guys on here that do them.

Well theres two guys claiming to but no one has actually started selling them yet. You might get in first.

yeh jamie make standard piping kits...i dont need one but heaps of ppl do...and the other blokes who have promised them havent materialized...slackasses