Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.
any guys here had this problem
got a reco t3 hi-flow just put it by mechanic
first day i got it, it was makin boost
the second day nuffin at all. i am ganna take it back to mechanic just after ppls opinion
car runs normal like an N/A doesnt stall or anyfin..
0 likes
wastegate jammed open, cooler/intake pipe fallen off.
0 likes
ye hope it's summfin small like coola pipe
0 likes
Have you got a cooler? Check all pipes and connections.
Check the intake pipe to the turbo to make sure its on properly and that any holes are properly bunged
Wastegate...
0 likes
lol.. **** doesnt that **** ya when **** like that happens?
then your hoping its something little..
oi did the mechanic rebuld the turbo for you or is he just an ordinary mechanic?
0 likes
Quote:
Originally Posted by VLCT-PSI
any guys here had this problem
got a reco t3 hi-flow just put it by mechanic
first day i got it, it was makin boost
the second day nuffin at all. i am ganna take it back to mechanic just after ppls opinion
car runs normal like an N/A doesnt stall or anyfin..
To find out if it is a wastegate problem, just get a piece of wire and wrap it round the waste gate flap at the rear to hold it shut and take it for a easy squirt down the road just keep an eye on your boost gauge cause if you floor it it will over boost to what ever the t 3 will boost too! Worked for me quick and easy stuff the mechanic too much mucking around it is i quick DYI!!
0 likes
this forum really needs to allow swearing, it limits most peoples vocabulary way too much
if you just paid a mechanic to do all this and it falls over the next day, id take it straight back to him and let him work it out. my hands are dirty enough as is
Some original photos have not been recovered yet.
0 likes
i had the same thing happen, as has been said. check your cooler piping, mine was blowing off at more than 15psi
0 likes
lol trying to reattach blown off cooler pipes is a pain in the ass
0 likes
10-07-05, 09:07 GMT+10#10 mine wasnt I had t get brackets welded up to the piping to prevent it though
Some original photos have not been recovered yet.
0 likes