Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home›Technical help
Technical help

calaisturbo.com.au - Configuring Gear Ratios

Started by trance · 9 Mar 2005 · 0 replies

Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.

tranceArchived member
Hey guys, This thread wont be useful to anybody who is not considering custom cut gears, this is only a guide to assist in a good gearbox combo setup. Most of the time people buy gearsets and the ratio is good but not fine tuned for your own application. Here is a list of variables which we will be using: a = previous gear b = next gear c = shift revs d = rev decrease (the revs you want the car to be at after you shift) Just say for example, I want to make a gearset and my first gear is 2.70:1, my optimum shifting revs are at 6,500rpm, and I would like the engine to drop to around 5,500rpm. I could find the next optimum gear by throwing it into an equation. The equation looks something like this: a:c = b:d What we can do here is put all of the information we have into the equation. ie: 2.70:6500 = b:5500 To find b, we use this simple rule: (a * d) / c When we put our info in we get something like: ie: (2.70 * 5500) / 6500 = 2.28 So we have just found out our Second Gear (2.28:1). If We continue doing this we can finish the gearset with your own ratios for your own application. I'll finish the rest of this gearset for you to understand how it works and the results. 2.28:6500 = b:5500 .. (2.28 * 5500) / 6500 = 1.93 1.93:6500 = b:5500 .. (1.93 * 5500) / 6500 = 1.63 1.63:6500 = b:5000 .. (1.63 * 5000) / 6500 = 1.25 There you are, you have just finished your first gearset. 1st 2.70:1 2nd 2.28:1 3rd 1.93:1 4th 1.63:1 5th 1.25:1 This gearset is only an example but you may like to work with something like that, considering the rev drops are small, the car wouldnt be using all of its go, but many race cars use close ratios in the optimum range within the bandwidth itself, where most torque and power is made. In some cases you may calculate a custom gearset and the final number will be 0.xx, dont be alarmed, this only means that the gear is an overdrive gear. But, if you didnt plan on an overdrive gear then I would recalculate the gearset. Anyway I hope you enjoyed it.. I'm rather board at the moment and I thought "Well I might as well post some rubbish on CT because I have nothing better to do" Sean Some original photos have not been recovered yet.
0 likes
Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.

Who’s online

0 members and 0 guests active in the last 15 minutes

No signed-in members active right now. Guests are welcome to browse.

Visitors Today26

33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo.
As at . Recovery is continuing.