Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗
Hey guys,
A hero in a Supra pulled up at the lights next to me the other day and decided to rev his engine while looking straight ahead and you could hear the turbo spool then a small flutter.
Prior to this instance I had noticed when my car is in neutral (It's a 5 speed by the way) you can put the boot to the floor and the boost gauge will hit 0 and you'll hear the turbo the tiniest bit but it won't spool. Which is why I chose not to act like a fool and rev the guts out of my car for somebody obviously obsessed over neons and rice bodykits.
The engine can rev its tits off but won't go past 0 on the boost gauge. And it does the exact same thing with the clutch all the way in, in first gear. Should it be spooling when you give it a boot or not?
Anthony...
0 likes
it's because it isn't under any load.
Some original photos have not been recovered yet.
0 likes
so why does the supra spool?
0 likes
probably had a fake turbo that came with his neon package :P
0 likes
hmm i'v always wondered the same... i guess it's small turbo's being twin cam or something.. i can still rev my car and the bov goes off with some flutter but you gotta rev the tits of it..
0 likes
Yeah I can get mine to do it if I pump the accelerator a few times and rev it hard and the gauge reads about 4 PSI and the BOV goes nuts, it works good to get chicks attention I find!
0 likes
Yeah I thought it might have been that the turbo's are small, but I have seen other cars do it as well, not just the Supra. Glad it aint just my car that doesn't do it then
Some original photos have not been recovered yet.
0 likes
could it be the difference between a roller and a plain bearing (bushes) turbo?
0 likes
Antho get rid of your mufflers
Some original photos have not been recovered yet.
0 likes
27-02-05, 22:55 GMT+10#10 the turbo needs heat to spool and free reving does not have
much heat in it
if you rev it up then back of and then rev it again it should have
4-5 psi coz you are getting the turbo spining first then adding the heat..
0 likes
27-02-05, 23:03 GMT+10#11 The turbo doesn't need heat, it needs exhaust gas and when the engine is under load (driving) it produces more exhaust gas then when it is in neutral and just revving without load. If this is the case then people would put a heater under their turbo to get more boost and it would be "fully sic hot turbo"
0 likes
27-02-05, 23:40 GMT+10#12 Depends on the size of the turbo I guess, my laser could make a massive "PTSCHT" and flutter away if I revved in neautral.
My T60-1 is lucky to get anywhere atmo pressure (0 psig), let alone a positive pressure, when revving in neutral
Some original photos have not been recovered yet.
0 likes
28-02-05, 01:00 GMT+10#13 I can only get my turbo to 0psi.
It still makes a loud flutter from my filter but no where near as much as if its under load..
0 likes
28-02-05, 01:15 GMT+10#14 Just short quick stabs of the accelerator will give you boost i hit 8 psi in neutral.
0 likes
28-02-05, 10:18 GMT+10#15 Quote:
Originally Posted by [VLTXTC]
Just short quick stabs of the accelerator will give you boost i hit 8 psi in neutral.
Correct. It's not about revving the engine in neutral, you will have more success with stabbing the accelerator a few times.
0 likes
28-02-05, 10:25 GMT+10#16 Hmmm will try this when I get home. I cant get mine to spool either. I hate not being able to launch with no boost. Damn Auto!
0 likes
28-02-05, 10:26 GMT+10#17 Quote:
Originally Posted by jordy
Correct. It's not about revving the engine in neutral, you will have more success with stabbing the accelerator a few times.
i saw someone in a r33 skyline do this unsure if it was rb25 or rb20 i was in bayswater maccers and when he was rolling past he gave it a rev and it let out a hudge flutter and my mates r31 rb30et doesnt do it only when driving
Some original photos have not been recovered yet.
0 likes
28-02-05, 10:26 GMT+10#18 Quote:
Originally Posted by Dansedgli
Hmmm will try this when I get home. I cant get mine to spool either. I hate not being able to launch with no boost. Damn Auto!
I hear a 5 speed calling for you man.
0 likes
28-02-05, 10:30 GMT+10#19 Quote:
Originally Posted by Dansedgli
Hmmm will try this when I get home. I cant get mine to spool either. I hate not being able to launch with no boost. Damn Auto!
also if u have an auto shouldent u be able to put your foot on the brake and accelerator when sitting at the lights then remove you foot from the brake when the lights change , wont it launch with boost then?
0 likes
28-02-05, 10:42 GMT+10#20 Quote:
Originally Posted by redvk
also if u have an auto shouldent u be able to put your foot on the brake and accelerator when sitting at the lights then remove you foot from the brake when the lights change , wont it launch with boost then?
Nope I cant stall it up enough before I get wheelspin and no boost.
Ive got a falcon by the way. The 5 speeds are ****ty. I have mates with turbo EA's on there 4th and 5th box.
0 likes