Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.
over the last 2 week holidays i set 3 days aside to do the manual conversion, with some added help from my mate.
its all in and all good, however just have an idel problem,
the car idels ok for a few moments and then drops low low, just like its about to stall. it was ok before the manual,
and yes i have pluged the vacume hose from the auto,
have any of u guys had this problem, or do i need a manual computer, or do i need to short some extra wires. just a dog to drive
0 likes
Did u change any wires and unplug the wires from the g/box to the loom.Is the car NA or Turbo? u have to change a couple of wires around write back and let me know wot u did?
0 likes
well all i did was short the nuteral starter, and conect the reverse light. i also disconected the auto computer. that was all, however i didnt touch the ecu.
0 likes
check your connections to the TPS, and then re-set the idle speed.
0 likes
the neutral safety swtich wires r on the same plug as the reverse light wires right?
Some original photos have not been recovered yet.
0 likes
yea they are in the same set of wires
0 likes
