Hey guys -
need some opinions / help here.
soon the car will be offf the road so that i can do the g/box -
now i was thinking that maybe i should buy brand new bolts for the flywheel - pressure plate etc as i am expecting her to withstand a bit of a bashing.
now - is there any part numbers for these mx7 bolts???
should i be buying new ones? where from?
also what g/box oil is highly reccomended - synthetic? need the best there is.
also a part number or even somewhere i could buy all the vl turbo exhaust manifold studs / bolts would be great.
thanks in advance guys
Cheers -
Petros
I would use the original Flywheel bolts, but take a sample bolt from the pressure plate and go to any engineering shop and get "Grade 10" bolts from them.
Use "Redline" synthetic gear oil 75W90 MT-90 (GL4)
http://www.redlineoil.com/redlineoil/mtlti.htm
Nissan R31 Skyline manual spigot bush. (P/N 32202-B9500) - Nissan part number ( do this at the same time. )
Six flywheel bolts (12315-42L11) Nissan part number, Holden don't sell them anymore.
Carcrazy
thanks heaps guys
with the zorst studs - is there a part numbeR?
i dont want them to break ever ever again -
and how the F@#$ do i remove the stud which has broken all the way up the back at the bottom????
Some original photos have not been recovered yet.
the exhaust shop will know wich studs to give you, just tell them exactly which ones you need. Always replace a full set as they only cost about $25 and the old ones are probably half stuffed anyway.
To stop them snapping, try a high temp nevaseize on the threads and replace the factory nuts with normal nuts as the factory ones have a slight crimp on the threads to act like locknut.
