hey guys i need to find out what i need to do to the wiring, were the wire are for the nutural safty switch, and the other stuff. apart from this the manual is ready to go in

i dunno aye - but if you take pictures at all of the process or any probs or easyness of the job, pppllleeeaaassseee let me know. im so sick of my auto and would love a manual and would rather do it myself. any help would be greatly appreciated... sorry i cant help you tho Some original photos have not been recovered yet.

I simply crossed two wires on the neutral safty switch so it would start. this is a big 8 pin connector, i crossed the pink and blue wires. looking from the connector side, pins 1 and 3 (using the diagram below) 1 2 3 4 5 6 7 8

I modified the wiring to work the neutral safety switch when I did a manual conversion to one of my VL's as the automatic loom is different to the manual loom. Funnily enough the VL I drive now is a factory manual and it cranks over in gear (haven't bothered finding out why) but I swapped the driveline over from my other VL as the motor & box in the factory manual VL was stuffed.

I modified the wiring to work the start relay with the neutral safety switch when I did a manual conversion to one of my VL's as the automatic loom is different to the manual loom. Funnily enough the VL I drive now is a factory manual and it cranks over in gear (haven't bothered finding out why) but I swapped the driveline over from my other VL as the motor & box in the factory manual VL was stuffed.