hi guys just wondering if anyone can help? have a turbo hiflowt3 nizpro cooler autronic bov ect have changed plugs leads dizzy rotor button ect. runs fine but when the boost hits 12psi starts to miss have tried makeing the gap on the plugs smaller but no diff. thourt i had bought bad leads or somethink but not the case got new ones still the same is really starting to give me the ****s normaly i can run 18psi no woorys so i am loseing lots of power at the moamant if anyone has any idears i would love to hear theme gaddo

have u checked your coil im not that experanced yet but by the sounds of it it could be heaps of things

have changed the coil but still no go yesterday i cleaned the c.a.s and the littlie round disc with holes in it moved not the same as stanard one can spin on shaft timeing then went out and there was no mark on it . went around the block to see how she went nock nock nock :x running really bad and blowing smoke in the past i have burnt holes in pisstons ect sounds simalar :cry: :cry: ops: not happy jane if so full rebuild she will come back as a ten sec monster Some original photos have not been recovered yet.

What fuel pump and injectors are you running? you may be running to lean, try getting it tuned.

all ready have bigger injectors and bigger pump have to let guys at pet in melb, thomastown to have a look and see and will get my inlet plenthum put on dynoed ect have to see what happens hopefully no damage to the inside of motor Some original photos have not been recovered yet.

Make sure you dont run boost until its tuned.. or BOOM