Hi guys, I'm about to re-mount my rear speakers and i'm sick of the crappy parcel shelf in there. What i wanted to know was, how easy it it to make a new one, and what thickness timber do i need? Also, the one thats in there has the curved bit at the back, with the one i make, can it be flat? If anyone's done it, can ya let me know. Thanks

altho i've never done it, i'd imagine it to be piss easy, i've taken the shelf out, it just slides out once u move the seat, u could have it flat if u want and just use something like 6mm mdf or particle board

yepos it's a piece of cake mate. pull the old one out, easier if u pull the whole back seat out as well. put it over ur wood and strce it out. get the jigsaw out and do some cutting. see if it fits in, if it doesn't see where it hits and cut again. i'll take come pics of my shelf and see if i can get the pics on the net to show ya :P

Thanks fellas.... I'm thinkin bout doing the parcel shelf, and a custom boot...

I made a custom boot Got some wood for the floor sides and back (thin stuff for the floor) and some auto carpet and it turned out all right... Some original photos have not been recovered yet.

Hey looks good Platinum.... I was thinking about something really custom like going nuts doing it... but then it doesn't seem much point for one 10" Pioneer.

Aghhh, thoses kenwood 12 are nice, until some ****er stole it.

That sucks Big ****ing bolts do the trick though, they'd be keen to get that one out of my boot Some original photos have not been recovered yet.

my box no one is getting out in a hurry. it's screwed in through the metal shels on top and behind the rear seats. it also rubs on both strut towers and top metal shelf and takes 2 people to lift out of the boot. i got some pics of my set up now just no webspace Some original photos have not been recovered yet.

How hard was it to do your Boot Platinum. Looks Sweet!!! what type of materials did you use? how u get the sides to stay vertical? Looks Sweet!! Do you have the dimensions by any chance?? Thanks.

u stole my idea platinum hehe ive made the same wall for my amp although my wires are hidden and my bos has sub facin other way. looking good but. im in the process of making a complete boot setup , got some cool ideas will post when finished , got all wood at work ready (thanks work - free wood) just got to do it.

All I used was a bit of wood from mitre 10 (12mm i think) and made a side for it and the back board, screwed the carpet in place at the top, and shoved it under the rubber boot seals at the other end... had to cut a few odd angles and shapes, though, a) do I could get the spare tyre out and b) so I could still reach the globes for the tail lights the carpet is just some automotive stuff I payed about $20 bucks for it, and did it all in a day of work Only problem is the sub is sitting there free-air at the moment, so I have to build a weird shape box for it at some stage. I stuck a bit of thin 5mm stuff on the floor to make it flat as well Some original photos have not been recovered yet.