How do i Test battery for COLD CRANKING AMPS
2 Feb 2008Voltage is checked with a multimeter, to check how many amps a battery can supply you need carry out a load test on it , most batteries have the cca on the sticker or amps per hour.
THE HOLDEN COMMODORE FORUM
HOLDCOM Community
Built around the cars. Kept alive by the people.
Sponsored by HOLDCOM AUTO PARTS ↗
+ Start a discussion
Forum Home / Member profile
DINGOVL
Archived member · original account, not a current login
12 posts1 discussions
Recent posts
Chinese T70 vs GT3540R
3 Jan 2008Had it redynoed on 20 psi made 275 rwkw, turbos losing its effeciency now, has performed well for $1000 though. Will be upgrading to larger setup.
Calder park and their KMH CRAP
2 Sept 2007I personally prefer mph as everything related to drag racing uses it. Had to get home and convert my kph to mph so i could compare my previous slips. Both measurements are fine, would be nice if they …
Chinese T70 vs GT3540R
3 June 2007Has been tuned now. Made 255 rwkw @17 psi using mobil 8000. Turbo still holding up well. Will be taken to 28-30 psi when race tune booked in.
Chinese T70 vs GT3540R
20 May 2007Made 242 so far with muffler holding engine back. Turbos holding up well so far will know the results end of the week hopefully. Makes boost from 3000 as well.
Chinese T70 vs GT3540R
25 Mar 2007Been a while since ive posted as i've moved to wa now for work. Car's still in melbourne, flying back over easter, still needs a tune so hope i can get one this time and run it. Car's done 5000 plus k…
Arias forgies piston/bore clearance
5 Dec 2006The pistons im running are the 2168's. Can't get the original arias rings, wanted to get filebacks , cant get them either so have been suplied hastings rings, end gaps have worked out allright suppris…
Arias forgies piston/bore clearance
3 Dec 2006No engine noise at all when cold, always warm it up to temp before i drive anywhere and havnt had a prob with it. Hopefully get it together and tuned this week if not week after. No engine noise at a…
Arias forgies piston/bore clearance
3 Dec 2006will be running mobil 8000 for street with low boost, high boost will be around 25 with better fuel, not sure what fuel to go as yet maybe c16 or similar, also reading up on varying toluene mixtures a…
Arias forgies piston/bore clearance
2 Dec 2006Pulled the engine down, p/b clearance was 4 thou, engines done bout 7000kms now and skirt wear is normal, will be running same tolerance again, arias recommend 4 thou. ring wear was normal with no but…
Who’s online
0 members and 0 guests active in the last 15 minutes
No signed-in members active right now. Guests are welcome to browse.
Visitors Today5
33,602 threads, 484,230 posts and 21,088 images saved from CT
98.1% of indexed threads saved