Boot lid springs/torsion rods installation?
23 Dec 2018Does anybody have an easy way of installing boot spring rods without skewered?
THE HOLDEN COMMODORE FORUM
HOLDCOM Community
Built around the cars. Kept alive by the people.
Sponsored by HOLDCOM AUTO PARTS ↗
+ Start a discussion
Forum Home / Member profile
camo7
Archived member · original account, not a current login
13 posts3 discussions
Recent posts
Ls1 coils to microtech lt8s
12 Nov 2017Quote: Originally Posted by Morgz [View Post] Yeah you won't have issues with the MSD unit, I ended up using the MSD blastr 3 coil and they worked well as a combo. I've also used ICE but would prefe…
Ls1 coils to microtech lt8s
12 Nov 2017Only around 300kw atw for now. Don't want to push the jatco too far past that. I did talk to microtech and it would cost too much. Would be better off buying a new ecu. So ive bought a msd 6al igniti…
Ls1 coils to microtech lt8s
10 Nov 2017Quote: Originally Posted by Wkd_Vl [View Post] Msd 6al i was running with a blaster coil Before the coil upgrade. And i kept melting the rotor button Oh. It turned up today so will give it a crack…
Ls1 coils to microtech lt8s
9 Nov 2017Thanks for the reply lads. I contacted microtech and my lt8s would have to be sent back to be reconfigured which would cost nearly as much as a new one so i have purchased a msd 6al. Hopefully it sho…
Ls1 coils to microtech lt8s
8 Nov 2017Quote: Originally Posted by PSI086 [View Post] I've done a set up using ls coils and wasted spark before wired to an adaptronic which worked well. I assume your ecu would be identical providing your…
Ls1 coils to microtech lt8s
7 Nov 2017Hi. Ive been told to upgrade my factory ignition system by my tuner . Keen to get rid of the distributor cap and go coils. I was going to run a waste spark setup with a falcon coil pack and a microtec…
shifter drop box hits transmission?
27 Aug 2015Cheers. I will have to get one to suit the jatco with a quicksilver. Can anybody recommend where to buy one from?
shifter drop box hits transmission?
26 Aug 2015Im using a b&m quicksilver mate.
shifter drop box hits transmission?
25 Aug 2015So i measured the box and it is square. It comes down 50mm from the floor so guessing its made for a powerglide. Can anyone recommend a drop box to suit the jatco? thanks
Who’s online
2 members and 10 guests active in the last 15 minutes
3,334 threads and 21,753 posts saved from CT