Slave cylinder pushrod length
14 Feb 2013The length I found was 73mm from the standard 65mm. This will probably vary but can be used as a starting length.
THE HOLDEN COMMODORE FORUM
HOLDCOM Community
Built around the cars. Kept alive by the people.
Sponsored by HOLDCOM AUTO PARTS ↗
+ Start a discussion
Forum Home / Member profile
ausiemick
Archived member · original account, not a current login
13 posts4 discussions
Recent posts
Slave cylinder pushrod length
4 Feb 2013Yes, I thought this might be the case. I'll just run up a few lengths and see which one works and then get a mate to machine a replacement one which is the right length. Thanks for the info.
Slave cylinder pushrod length
31 Jan 2013Master cylinder adjustment does not give the adjustment needed.
Slave cylinder pushrod length
31 Jan 2013Got a new one for a vl. The pushrod takes up about 10-15mm of the travel of the fork.
Slave cylinder pushrod length
31 Jan 2013Just done an auto to manual conversion and the clutch travel is too short, just off the firewall and the clutch engages. The standard pushrod length is 65mm, if I made one up what length should it be,…
Bang noise?
30 Oct 2012Air leak in exhaust manifold/exhaust system wil cause a backfire.
Manual to Auto
28 Oct 2012Any ideas. Thanks
Manual to Auto
23 Oct 2012Strange I know but is it possible to convert from manual to auto. I am swapping from a manual to an auto but I want to put the auto back in the manual to keep it as a working unit without having to wr…
Green VL
2 Apr 2012Forgot to mention he's just turned 15.
Green VL
1 Apr 2012Here is my sons Vl that he resprayed himself. Tried to get him to sign on and do his own thread. Nope was the answer. [IMG][Image in original archive] (http://imageshack.us/photo/my-images/826/imgp95…
Who’s online
0 members and 2 guests active in the last 15 minutes
No signed-in members active right now. Guests are welcome to browse.
Visitors Today45
23,141 threads, 289,872 posts and 2,772 images saved from CT
67.6% of indexed threads saved