Niche Fuse rails - need info
15 June 2017email sent
Built around the cars. Kept alive by the people.

Archived member · original account, not a current login
email sent
don't pull the compressor off. if it works right now but isn't very cold its most likely just low on gas. just book the car in somewhere for it to be checked out.
Just recently rebuilt my system with a new compressor. AFAIK no other compressor will fit. I believe the RB30 compressor was used on a small number of other models from the late 80's and early 90's so…
you most likely have to remove the rockers to install the head bolts anyway. dowel on cam sprocket should be at top and turn crank until number 1 piston is at the top of the cylinder. probably best to…
If everything is bolted on tight then that is normal. Depending on the position of the cam the lobes will be holding a valve or several valves partially or fully open. Loosen off the rocker shafts and…
is there a cam in the head?
Says I cant PM you? Chasing original GM carpet. PM me please.
Quote: Originally Posted by MUS [View Post] If your a noob or do it in the wind, yes you will get overspray everywhere. Common sense. Old news paper half way up the windscreen and halfway down the b…
Quote: Originally Posted by MUS [View Post] Just use any black from a spray can. I prefer satin. Don't bother taking them off, just put news paper and mask up the car under and around them much eas…
Quote: Originally Posted by MUS [View Post] Everyones saying dont put HIDs. So put em in to be safe. They were great in my senator [Image in original archive] Yeah Because blinding every oncoming c…
1 member and 12 guests active in the last 15 minutes
3,683 threads, 23,233 posts and 47 images saved from CT