Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home / Member profile

Carnal

Archived member · original account, not a current login

32 posts5 discussions

Recent posts

NA VL starting issues

23 Sept 2016

yep I would order both, the external might have been damaged from air/debris, not worth the risk for the extra $100 or so.. change your filter at the same time

NA VL starting issues

20 Sept 2016

If it runs okay with engine starter/ flammable spray it's most likely a fuel pump issue.. check the fuel flow (remove the line from the injector rail and crank it should fill a bottle pretty quickly)

AFM, Fuel pums, tune etc.. questions

16 Sept 2016

ah cool, thanks guys. is there much modification required with the wiring on the z32? or is it basically plug and play? (meaning do i need to swap wires to different terminals)

AFM, Fuel pums, tune etc.. questions

13 Sept 2016

Hi, got a couple of questions on what you guys use in your cars and what works.. 1. looking to finally get my car tuned but have been told i need a AFM to do this as the original just won't work for…

Hypergear turbo

23 July 2016

got mine about 2-3 years ago, yeah he said its a straight bolt on was wayyy off haha

Hypergear turbo

22 July 2016

I had a lot of trouble setting mine up. be ready to modify it as its not a straight bolt on as stated. (it won't fit on a standard manifold hits the rail) also the waste gate actuator had to be modifi…

RB30E Cylinder 6 not firing

12 Aug 2015

id suggest its only spark or fuel as its only the one cylinder and comp test was okay. as you said it smelt of petrol it sounds like there is no spark. did you check if there is spark at the end of …

vl wont start

15 June 2015

If aero start does it, it should be a fuel related issue.. also 70psi sounds way too high. Maybe a blockage? Check the fuel system thoroughly

Head Removal

19 Dec 2014

there is a mark on the crank sprocket which will point to approx 5:00 position (you will see the two marks), the cam sprocket will point straight up. Your timing belt will have 2 marks on it and they …

Tailshaft - Diff Bolts

22 Oct 2014

loctite should hold. Have you allowed it to dry completely before driving it>?

Who’s online

1 member and 11 guests active in the last 15 minutes

Visitors Today13

3,683 threads, 23,233 posts and 67 images saved from CT