Built around the cars. Kept alive by the people.
Archived member · original account, not a current login
I had my front ball joints replaced and new nolathane bushes installed in the front end and now the steering feels stiff and it does not self centre at all after cornering. Is this common with new bal…
Quote: Originally Posted by Pistol [View Post] My two vl's have/had tow gear fitted, I've heard it fks the boot/rear end by stretching. Mine have/had all manner of braces in/around the boot. I didn'…
Anything is possible mate, you just need all the bits that go with the auto. Not sure about the wiring but I thing there was an electronic module for the auto. The odds are it would plug into your exi…
There are lugs that hold the vent part in the dash. You need to get a flat screwdriver in the gap above the vents and gently push the top ones down until they let go. There are two on top I think, onc…
Yep, VL steering rack mounts are the same as VN onwards
Nice clean Berlina, a good base to build on. The most likely culprit for the the leak on the passengers side is the windscreen.
Interesting, I was adjusting mine the other day. The manual says to put it in diagnositc mode and set 10 degrees. I don't have a stock cam or tune but set at this mine was pinging a bit up hills. Its …
If its only rubbing on one side you will just need an adjustable panhard rod. If it rubs on both you may need the guards rolled to clear the tyres.
I ended up getting custom length struts from a strut supplier for my bonnet and even got it to open a bit higher than it used to. Can find the specs if your interested.
I asked about those plastic washers when I was changing my rack, apparently the original design needed them to ensure the boot sat correctly and to help it seal. After market boots have a different de…
0 members and 1 guest active in the last 15 minutes
Visitors Today110
11,970 threads, 91,732 posts and 1,230 images saved from CT