Built around the cars. Kept alive by the people.
Archived member · original account, not a current login
only need a mill back behind the existing hole, there is no pressure on that side of the hole as it only pushes the rod in, doesn't get pulled out. IT will sit about level with the accell pedal when i…
dont forget to drill a hole in the rod that connects to the pedal as ppl have mentioned before, otherwise the brake pedal sits about 2 inches higher than the accelerator pedal.
no leaks after 6 months, ill keep an eye on it, but its screwed up tight. I had to panel beat the section directly under the booster as its a slightly larger diameter, If you do it properly and give …
i didnt use the line adapters, threads are the same, only the flaring is different, I have zero leaks, tightened up perfectly, u dont need them AFAIK
hey all, my old NA brake booster died so i just finished putting in a complete vt-vx booster & master. It fits with only a coupla mods, I had to mod the bracket, drill a hole in the rod for the pedal,…
ouch its hot from the flames in here!
replaced: 2 motors, cas, timing belts, 2 doors, guard,elec arial, mirrors, rebuilt auto, all seats, carpet, 4 manifold gaskets, 4 head gaskets, 3 ****ed heads, front panels, headlights, windscreen, ta…
I had the same problem for the last 12 months, Found out i had 2 problems, 1st was the CAS, went through 3 before i bought a new one, Car kept going, but would randomly go **** and stall on me. 2nd …
I had the same problem, but mine was cause the windscreen guy didnt seal the windscreen properly, mine was leaking at the top and side and running down to the ECU, I pulled out all the black strips an…
Quote: Originally Posted by Jimma Heh, been a drug dealer long? lol! I feel the need..... the need for weed.
0 members and 2 guests active in the last 15 minutes
Visitors Today33
33,594 threads, 484,053 posts and 6,081 images saved from CT