What e85 injectors everyone using ?
23 Feb 2018Is the Bosch 1650 enough for high boost gtx42 built rb30 ?
Built around the cars. Kept alive by the people.

Archived member · original account, not a current login
Is the Bosch 1650 enough for high boost gtx42 built rb30 ?
Quote: Originally Posted by Skinkis [View Post] Measure. Once you've measure your clearances, then you measure again. Other than that, the obvious things like using quality parts, quality torque w…
what are the secrets in building a strong bottom end ?
Quote: Originally Posted by Antho [View Post] Which wire is chopped? Have you recently had problems or has it always been like that? The 2 pin plug that connects to the alternator Yep bought the …
The plug going to my alternator has one wire chopped ? Does it only need the one wire ?
Quote: Originally Posted by Antho [View Post] Yes lift pump is same between N/A and turbo external same between N/A and turbo you can get both VDO from eBay, get the lift pump that comes with the …
Quote: Originally Posted by Antho [View Post] It sounds like it is getting air pockets, either the lift pump might be stuffed or the hose inside your tank could be perished. Drain as much fuel as y…
Quote: Originally Posted by Antho [View Post] Penrite HPR used to be semi-synthetic now they are full synthetic I use HPR 15 in my rebuilt RB30, has about 20,000klms, nothing flash just aftermarket…
Quote: Originally Posted by SIroller [View Post] i use hpr 30 Penrite. when my car had a fresh engine this is what a lot of high hp guys were using in their cars so in lieu of doing research i said…
Quote: Originally Posted by Antho [View Post] It sounds like it is getting air pockets, either the lift pump might be stuffed or the hose inside your tank could be perished. Drain as much fuel as y…
0 members and 4 guests active in the last 15 minutes
Visitors Today47
3,683 threads, 23,233 posts and 359 images saved from CT