Turbo coolant lines info
3 Aug 2017One of the block on the same side as the turbo and the other tees into the other side of he head. Think it goes near the heater lines. There is photos on here or google if you search.
Built around the cars. Kept alive by the people.

Archived member · original account, not a current login
One of the block on the same side as the turbo and the other tees into the other side of he head. Think it goes near the heater lines. There is photos on here or google if you search.
You can get the Harrop centre in 31 spline if you ask nicely. **** info to have now, but for anyone else playing it is certainly possible. Quote: Originally Posted by joe185i [View Post] I've buil…
There is no NPT on the engine from what I can remember. You sure you don't have an early RB30 block? I can't remember but it may not have the water feed etc The return thread is 3/4 BSP.. 3/4 NPT th…
Quote: Originally Posted by mister.x [View Post] After reading almost every post about turbo lines on Calaisturbo and probably half of SAU I am still stumped. The water feed hole on my block is sma…
Mitch 3" Turbo back shouldn't make any difference at all, it should actually help with spool. Double check your cam timing and ignition timing mate. I think being a GQ it will be manual. The stock se…
Stock turbo setup. As long as it makes the peak HP and torque you need.
Do a bit of a search, there is a few threads that cover it. If you like I could make you up a kit and send it out. None of the eBay stuff works unless you are prepared to butcher it all. Depending o…
They won't blow the tyres off just mashing it in an auto.. even with a single spinner. In the wet they would.. but in the dry with decent tyres, not a chance. Go and pay $50 for a dyno run and see wh…
What was it?
That is a real possibility. Quote: Originally Posted by RED1M8 [View Post] Doesn't sound right, cam timing may be out.
1 member and 8 guests active in the last 15 minutes
Visitors Today10
3,683 threads, 23,233 posts and 50 images saved from CT